Cart 2 india

Specification
Brand : Aceteel
BulletPoint1 : 【Size】Length: 6.3"/160mm, Thread Head: 3.9"/98mm.
BulletPoint2 : 【Feature】Made of High-speed steel with high hardness and toughness, provide rapid chip removal for efficient threading.
BulletPoint3 : 【Application】Make or repair thread, suitable for most metals, copper, alloy steel, cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC.
BulletPoint4 : 【Usage】Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping.
BulletPoint5 : 【Package Included】1pc ACME 5/8"-8 Trapezoidal Tap.
Color : As the Picture Show
CustomerPackageType : Standard Packaging
CutType : Rounded
ExternallyAssignedProductIdentifier1 : 0645688827596
ExternallyAssignedProductIdentifier2 : 645688827596
IncludedComponents : come with Tap and Die
ItemDisplayDimensions_Depth : 1 inches
ItemDisplayDimensions_Diameter : 4 centimeters
ItemDisplayDimensions_Height : 4 centimeters
ItemDisplayDimensions_Length : 5 centimeters
ItemDisplayDimensions_Width : 5 centimeters
ItemDisplayWeight : 0.49 ounces
ItemName : Aceteel ACME 5/8-8 Trapezoidal Tap, ACME 5/8"-8 HSS Trapezoidal Thread Tap Right Hand
ItemPackageDimensions_Height : 6.35 centimeters
ItemPackageDimensions_Length : 1.27 centimeters
ItemPackageDimensions_Width : 5.08 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : thread-milling-taps
ItemTypeName : Tap and Die
Manufacturer : Aceteel
Material : High Speed Steel
MeasurementSystem : Metric
ModelName : Tap and Die
ModelNumber : M12 x 1.5mm
NumberOfBoxes : 1
NumberOfItems : 2
PartNumber : ACL_ACME_5/8-8_RH
PowerSourceType : fuel_powered
ProductDescription : Size: ACME 5/8"-8 Trapezoidal Thread Taps.
Cutting Direction: Right Hand.
Material: High Speed Steel.

Easy to Use
It can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc.

Control the speed according to the hardness of the material. The higher the hardness of the processed product, the slower the speed.
Recommended feed rate: General steel: 6-15m/min; harder steel: 5-10m/min; cast iron: 8-10m/min.

Tips
1. Before tapping confirm whether the diameter of the round hole is appropriate, and to take protective measures when working.
2. When tapping, it is necessary to add water or coolant to cool down to prevent excessive temperature and reduce tap loss. If it encounters difficulty in rotation, the tapping should be suspended.
3. Be sure to select the appropriate cutting oil for the complex tapping process and apply anti-rust oil for maintenance after use.
ProductSiteLaunchDate : 2022-06-16T00:00:00.000-07:00
Size : ACME 5/8"-8
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1