Cart 2 india

Specification
Brand : WnewTools
BulletPoint1 : Application: The anaerobic thread locking to avoid loosening and leakage of threaded fasteners. For M6-M36 thread locking and sealing. Prevent thread corrosion.
BulletPoint2 : K-0242 (General Purpose / medium strength thread locking anaerobic) is a one-component, thixotropic medium viscosity, medium strength, general purpose anaerobic thread locking anaerobic adhesive. The anaerobic thread locking between close fitting metal surfaces and cured with air isolation. The anaerobic thread locking hand tools available demolished.
BulletPoint3 : Typical uses: screw locking.
BulletPoint4 : Specification:
BulletPoint5 : Base chemical composition: methyl methacrylate
BulletPoint6 : Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent
Color : PA/M6414 (1990-1995) Deep Jewel Green ...Clearcoat
ExternallyAssignedProductIdentifier1 : 0769903003883
ExternallyAssignedProductIdentifier2 : 769903003883
FcShelfLife : 900 days
IncludedComponents : No
IsExpirationDatedProduct : 1
ItemName : K-0242 Anaerobic Adhesive Metal Thread Locking Glue Thread Sealant Anti-rust Glue Removable 50ML M6-M36
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-thread-lock-sealers
Manufacturer : Wnew
ModelName : automotive-thread-lock-sealers
ModelNumber : ATOOL1723978
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : ATOOL1723978
ProductDescription :

Features:

Application:The anaerobic thread locking to avoid loosening and leakage of threaded fasteners. For M6-M36 thread locking and sealing. Prevent thread corrosion.

Specification:

Base chemical composition: methyl methacrylate

Appearance: blue viscous liquid

Viscosity (mPa.s): 1000-3000

Specific Gravity: 1.05

Flash point (° C):> 108

Maximum fill the gap (mm): 0.13

Room temperature curing time (min): 20

After curing properties:

Full cure time at room temperature (hr): 24

Destruction of torque (Nm): 12

The average removal torque (Nm): 7

Operating Temperature (° C): -54 ~ 149

Instructions:

Painted surfaces should be clean, dry and no oil.

Bolts painted in sufficient quantity to fill all engaged threads, a thin layer of the product results in a 0.05 mm or less work best.

For large thread sizes, the larger the gap will affect cure speed and strength of the product. This product will reduce the friction force (torque tension ratio) assembly generated. Need to be fastened to the threaded applications critical value, the need to determine in advance a good ratio.

Caution:

The anaerobic thread locking should not be used on plastic parts; in order to avoid contamination of the original glue, do not have poured the glue back to the original packaging.

Safety Precautions:

The anaerobic thread locking containing methyl acrylate, skin and eye irritation. If skin contact, immediately wash with water; If contact with eyes, rinse immediately with water and go to the hospital for treatment.

Packing: K-0242 with 50ml plastic bottles.

Storage conditions:

in the temperature range of 15 ~ 28 ° C in a cool, dry place sealed, shelf life of up to 12 months.

Package Included:

1 x K-0242 Anaerobic Adhesive

ProductSiteLaunchDate : 2024-10-20T14:06:33.702Z
Size : Half-Ounce Jar All-Inclusive Package
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31201600
WarrantyDescription : 12 Months