Cart 2 india

Specification
Brand : WIDIA
BulletPoint1 : TRU-LEDE Fe taps made from vanadium high-speed steel for extending wear life and better part finish in ductile materials
BulletPoint2 : TRU-LEDE tap made from HSS for use in general machining applications
BulletPoint3 : Plug and bottoming entry tapers for form tapping without troublesome chips that clog and break taps
BulletPoint4 : Runs up to 4x faster and lasts up to 4x longer than conventional high-speed steel taps, Excellent thread quality and tap performance
BulletPoint5 : Form E Bottoming Entry Taper, DIN Length ANSI Shank, Metric
CutType : Taper
CutType1 : Rounded
CutType2 : Taper
ExternallyAssignedProductIdentifier1 : 4021169521157
ExternallyAssignedProductIdentifier2 : 04021169521157
ItemName : WIDIA GTD 17215 TRU-LEDE 5502 Tap, Full Bottom Chamfer, Right Hand Cut, 0 Flutes, Forming, 4-40, HSS, Uncoated
ItemPackageDimensions_Height : 8.3 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1.3 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : thread-forming-threading-taps
Manufacturer : WIDIA Products Group
Material : HSS
ModelNumber : 2747607
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : 2747607
ProductDescription : Tool holder is balanced to G2.5 20,000 RPM on a HAIMER Tool Dynamic Balancing System from Germany. Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish. Unique design feature in the flange to minimize the off-balance nature of CAT 40 taper specification. On the shoulder under the flange, a side is mill flat to compensate the weight of the metal chips lost from forming the spherical hole in the flange. This design allows the left side and right side of the holder to achieve 50-50 perfect weight distribution in its upright position, like the position inside a machine spindle. Symmetrical design in evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation. To achieve AT3 or better taper contact as an industry standard, our taper surface are precision ground on Shigiya CNC grinder from Japan. We are not satisfied with just meeting the industry standard, the surface roughness on the taper is maintained to mirror finish. The maximum torque is laser marked on the ER collet nut face to take the guess game out of the way to ensure proper amount of force should be applied while tightening. Innovative coating process significantly increases the clamping force by 75% compared to standard ER collet nut. More gripping force provides better rigidity and reduces the possibility of losing grip on the round shank which lead to expensive damage on cutting tools and work piece material.
ProductSiteLaunchDate : 2016-10-26T08:00:01.000Z
Size : 0 Flutes - Forming - 4-40
StreetDate : 2017-05-15T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
ToleranceHeld : Precision
UnitCount : 1