Cart 2 india

Specification
Brand : FTVOGUE
BulletPoint1 : [Clear Lcd Display] - Conveniently observe readings on the digital display for improved work efficiency.
BulletPoint2 : [Automatic Shutdown Function] - Save power with the automatic shutdown feature after inactivity.
BulletPoint3 : [Measure with Speed and Accuracy] - Quickly measure coating or coating thickness on various metal surfaces.
BulletPoint4 : [Automatic Identification] - Easily distinguish between iron and aluminum substrates for efficient measurements.
BulletPoint5 : [ Materials] - Made of abs, steel, and ptfe for wear and in all weather conditions.
Color : Black
ItemName : Thickness Tester Digital LCD Paint Gauge Meter for Car Coating Measurement with
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 17 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : thickness-gauges
Manufacturer : FTVOGUE
ModelName : Ftvogueqip05aw4k2
ModelNumber : FTVOGUEqip05aw4k2
PartNumber : FTVOGUEqip05aw4k2
ProductDescription : Spec:

Item Type: Thickness Gauge
Model:
Material: ABS+steel+PTFE
Battery: 2 x 1.5V AAA(battery not included)
Probe F Probe N
Principle Magnetic Induction Eddy Current
Range 0~1500um 0~1500um
0~59.1mil 0~59.1mil
Accuracy ±(3%+2um) ±)3%+2um)
±(3%+0.08mil) ±)3%+0.08mil)
Resolution 0.1um/0.01mil 0.1um/0.01mil
Calibration Zero/Multipoint
Unit um, mil
Minimum curvature radius convex 1.5mm / 0.06in
Minimum curvature radius concave 25mm / 0.98in
Minimum Measurement Area Diameter 6mm / 0.24in
Minimum Thickness of Substrate 0.5mm(0.02in) 0.3mm(0.012in)
Working Environment Temperature: 0~40℃(32~104℉)
Humidity: 20%~90%RH


Package List:
1 x Thickness Gauge(battery not included)1 x Manual (English)
1 x Manual (Russian)
1 x Iron Sheet
1 x Aluminum Sheet
5 x Plastic Sheet
1 x Carrying Case

How To Use:
1. Place the battery: Open the battery compartment, insert 2 AAA batteries, and close the battery cover.
2. Prepare the target sample for measurement.
3. Put the pressure gauge in the air at least 5cm away, then turn on the power and wait for 5 seconds
Used for system initialization.
Note: If the LCD shows that the battery is low and the measurement is inaccurate, please replace the battery.
4. Press the um/mil key to select the unit (um, mil); press the MODE key to select SNG/CON; SNG means single measurement mode; CON means continuous measurement mode.
5. Start measuring. SNG (Single Point Measurement Mode), the probe is placed on the sample vertically and quickly, and when a buzzer sounds, the reading is displayed on the LCD. CON (Quick Continuous Measurement Mode) places the probe vertically on the sample, keeps the probe on the sample, and randomly changes the measurement point for the next measurement.
6. Turn
ProductSiteLaunchDate : 2025-03-15T17:04:44.954Z
UnspscCode : 53120000