Cart 2 india

Specification
AgeRangeDescription : adult
Brand : NURII
BulletPoint1 : MATERIALS:Stainless steel material, hard and wear-resistant
BulletPoint2 : Standard:Clear and accurate calibration, convenient and intuitive reading.
BulletPoint3 : Maintenance:In order to ensure the accuracy of measurement, please clean and maintain the product in time.
BulletPoint4 : apply:The scraper fineness meter is mainly used to measure the fineness of pigments and impurity particles in coatings, paint pastes, inks and other liquids and pastes
BulletPoint5 : Use and read:Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
Color : One Color
ExternallyAssignedProductIdentifier : 7625969502995
ItemName : NURII Stainless Steel Fineness Gauge Grindometer,Fineness of Grind Gauge QXP 0-50um
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : thickness-gauges
Manufacturer : NURII
Material : stainless steel
ModelName : NURII
ModelNumber : NURII
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : NURII
ProductDescription : Model No.:
QXP : Double Groove
QXD : Single Groove
Single slot scraper fineness meter QXD 0--25 QXD 0--50 QXD 0--100 QXD 0--150
Double slot scraper fineness meter QXP 0-25, QXP 0-50, QXP 0-100, QXP 0-150
Detailed Images
QXD---Single Groove
QXP ---Double Groove
Technical Parameters
Type
Measuring range
Effective groove size(L×W)
Maximum range m
Minimum scale value m
Recommended range m
Single groove
QXD
0--150 m
140mm×13mm
150
10
90-140
QXD
0--100 m
100
10
40-90
QXD
0--50 m
50
5
15-40
QXD
0--25 m
25
2.5
5-15
Double groove
QXP
0--25 m
140mm×13mm
25
2.5
5-15
QXP
0--50 m
50
5
15-40
QXP
0--100 m
100
10
40-90
QXP
0--150 m
150
10
90-140
Matters Needing Attention
1. The front of the scraper can be used for daily inspection of the straightness of the scraper. 2. Wash the scraper after use, apply anti-rust oil and put it into the box for storage. 3. The front of the scraper and blade shall not be knocked against. 4, Each set of scraper fineness meter configuration: one scraper, two blades.
Related Products
ProductSiteLaunchDate : 2024-08-19T03:19:53.037Z
Size : One Size
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 52140000