Cart 2 india

Specification
Brand : BWP
BulletPoint1 : Made of stainless steel
BulletPoint2 : Check the internal alignment of your fit-up quickly with the HI-LO gauge
BulletPoint3 : INCH SIZE
BulletPoint4 : Light weight, easy to carry
BulletPoint5 : In order to facilitate the user to carry and store, gauge is designed to pack in synthetic leather bag
Color : Silver
ExternallyAssignedProductIdentifier : 6940014026044
ExternallyAssignedProductIdentifier1 : 0690111702353
ExternallyAssignedProductIdentifier2 : 690111702353
ItemName : B.W.P HI-LO Welding Gage Internal Economy Single Purpose Gauge Root Gap INCH size
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 16 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : thickness-gauges
Manufacturer : Best Welding Partner
Material : Stainless Steel
ModelNumber : Mini Sub Socket Weld Gauge
PartNumber : BWP1408250004
ProductDescription :
Details:

Internal Hi-Lo gauge:
4 quick steps check internal alignment
You can check the internal alignment of you fit-up quickly with the Hi-Lo gauge
1. Unlock the retaining screw. press the gauge legs beyond the barrel
2. Insert the legs (wired) into the root gap space or the two pieces of pipe to be fitted, turn the gauge 90°, being careful to apply a constant back pressure to the barrel
3. Hold the gauge as square as possible with the fitting to obtain an accurate reading. lock the retaining screw. reverse the 90° turn and remove the gauge, you're now ready to read the increment opposite the red line
4. When the red line aligns with the 1/32 increment line you have a good internal alignment and fit-up. misalignment can be determined from the zero line by increment marking of 1/16 inch

Rootweld spacing gauge:
Easy operation determines rootweld spacing
1. Unlock the retaining screw and insert the gauge interior alignment stops between the two pieces of pipe to be fitted
2. Insert the leg with the longer taper into the root gap until it makes contact with both slides of the gap.
3. Re-lock the retaining screw, remove the gauge and read it
4. The scale is calibrated in fractional dimensions from 1/32 to 3/16 in 1/16 inch increments, the read-out you receive represents the amount of rootweld gap
ProductSiteLaunchDate : 2016-08-25T07:00:00.000Z
UnspscCode : 23271800