Specification Brand : HUABAN BulletPoint1 : NTC Power Thermistor BulletPoint2 : Part Number: 5D-15 BulletPoint3 : Rated Zero-Power Resistance: 5 ohm ±20% BulletPoint4 : Package Quantity: 20 Pieces BulletPoint5 : Do not connect the obvious and drive module voltage, current, power phase does not match or far from the motor to avoid inexplicable "nonsense" damage. BulletPoint6 : Received the goods, in the wiring and use of unclear, please contact us at the first time to communicate, even if there are problems with the use of the product, but also friendly consultation properly handled. Color : Yellow CustomerPackageType : Standard Packaging ExternallyAssignedProductIdentifier1 : 0713806671656 ExternallyAssignedProductIdentifier2 : 713806671656 Hazmat1 : MANUAL GROUNDING Hazmat10 : DE_NoAir Hazmat11 : EG_NoAir Hazmat12 : ES_NoAir Hazmat13 : FR_NoAir Hazmat14 : GB_NoAir Hazmat15 : IN_NoAir Hazmat16 : IT_NoAir Hazmat17 : JP_NoAir Hazmat18 : MX_NoAir Hazmat19 : NL_NoAir Hazmat2 : UN9999 Hazmat20 : PL_NoAir Hazmat21 : SA_NoAir Hazmat22 : SE_NoAir Hazmat23 : SG_NoAir Hazmat24 : TR_NoAir Hazmat25 : US_NoAir Hazmat26 : ZA_NoAir Hazmat3 : 3 Hazmat4 : AE_NoAir Hazmat5 : AU_NoAir Hazmat6 : BE_NoAir Hazmat7 : BR_NoAir Hazmat8 : CA_NoAir Hazmat9 : CN_NoAir ItemName : HUABAN 20 Pieces NTC 5D-15 5 Ohm MF72 Power Direct Heat Type Negative Temperature Coefficient Thermistor 20% ItemPackageDimensions_Height : 11.8 centimeters ItemPackageDimensions_Length : 1.1 centimeters ItemPackageDimensions_Width : 7.9 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : thermistors Manufacturer : HUABAN ModelNumber : 5D-15 NumberOfItems : 20 PartNumber : NTC-Thermistor-5D-15-20PCS ProductDescription : Motherboard specifications: Operating voltage: 5-50V (limit 60V) Drive current: rated 16A plus air-cooled cooling 25A Power: rated 200W-250W peak 300W (please leave a margin to use) Overcurrent protection: Yes Plugging protection: Yes (after plugging, the current automatically drops to hit the isolated operation) Over-temperature protection: Yes (over-temperature power reduced by half) Maximum speed: 224000 RPM (2-pole motor), 74000 RPM (6-pole motor), 40000 RPM (12-pole motor), 35000RPM (14-pole motor) Interface Description: 1.U V W 3 phase DC output Connect brushless motor. 2. 5V GND Main board comes with 5V (external output current within 40MA). 3. VCC GND drive main power supply (external DC power supply). 4. SC speed pulse signal output (only leave out the interface, not technical support). 5. DIR forward and reverse control Keep low level effective (can be external switch to ground). 6. BRAKE brake control active brake Keep low level valid (can be external switch to ground). 7.SOTP stop control Keep low level valid Flat is not used can be suspended or high resistance state (can be external switch to ground). 8.0-5V 1-4.2V PWM speed control signal three inputs (the board comes with a potentiometer speed control can also be external 0-5V touch volume, PWM duty cycle, signal input speed control). Three-phase DC brushless Hall-less motor controller PWM brushless motor ESC driver board PLC Note: This driver is DC three-phase brushless Hall-free control board, the motor without Hall can also work normally. The maximum voltage (60V) and maximum power (300W) marked in this module are the limit parameters under specific conditions, so the actual application should leave a margin for use. ProductSiteLaunchDate : 2022-09-27T03:52:06.086Z Size : 5D-15 SupplierDeclaredDgHzRegulation : not_applicable UnspscCode : 41112200 Voltage : 5 volts