Specification Brand : CNRCWROG BulletPoint : Magnetic Circuit Breakers Color : 100A Department : Unisex Adult ExternallyAssignedProductIdentifier : 7375604281463 ItemName : GYHO8 4P 40A 63A 100A 125A Dual Power Manual Transfer Isolating Switch Interlock Circuit Breaker Modular Changeover Switch 1Pcs(100A) ItemPackageDimensions_Height : 1 centimeters ItemPackageDimensions_Length : 3 centimeters ItemPackageDimensions_Width : 2 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : magnetic-circuit-breakers Manufacturer : CNRCWROG ModelName : CNRCWROG ModelNumber : CNRCWROG NumberOfItems : 1 PartNumber : CNRCWROG ProductDescription : Magnetic Circuit Breakers General GYHO8 dual power manual isolation switch has four functions-on, off, conversion and isolation. It can be freely switched on and off between two loads carried by a group of lines, or on two power sources. It is used for on-off and switching , using DIN standard rail (35×7.5) installation. The shell is made of PA66 injection molding, with high flame retardant performance. It is an ideal product that needs to be used for switching and opening and closing in industrial equipment and circuits. The rated current is 40A/63A/100A/125A, and it is convenient and safe to install and wire on the guide rail. Instructions for use 4P Manual Transfer Switch(MTS) 1.When the handle on the I position: 1 and 2 are connected 5 and 6 are connected 9 and 10 are connected 13 and 14 are connected. 2.When the handle on the II position: 1 and 4 are connected 5 and 8 are connected 9 and 12 are connected 13 and 16 are connected. 3.When the handle is in the middle position: both groups are disconnected. The position of the incoming and outgoing wires can be adjusted according to actual needs (the upper and lower out are not necessarily required, when used for dual power switching, the lower in and upper out must be used.) ProductSiteLaunchDate : 2024-11-06T09:21:57.005Z Size : 4P UnitCount : 1 UnspscCode : 46171600