Cart 2 india

Specification
Brand : LYNICESHOP
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
Color : Blue
ExternallyAssignedProductIdentifier1 : 0756804773939
ExternallyAssignedProductIdentifier2 : 756804773939
ExternallyAssignedProductIdentifier3 : 00810146541233
GpsrSafetyAttestation : 1
ItemName : LYNICESHOP Concrete Texturing Skin, 12 * 12'' Concrete Floor Stamp Mold Concrete Seamless Stamp Cement Texture Stone Slate Texture Stamp Mat Concrete Cement Stamping Tools for Walls, Floors
ItemPackageDimensions_Height : 0.15 inches
ItemPackageDimensions_Length : 4.75 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : texture-plates
Manufacturer : LEISHENYIN
Material : PU
ModelName : Concrete Texturing Skin
ModelNumber : Concrete Texturing Skin
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PaperFinish : uncoated
PaperWeight : 80
PartNumber : Concrete Texturing Skin
ProductDescription :

Specification

Color: Blue

Material: PU

Style: Modern

Gross Weight: 1kg/2.22lbs

Product Size: About 30*30cm/12*12in

Construction Process of Embossed Floor

The formwork erection, paving, vibrating, grouting, and leveling shall be completed according to the construction procedures of pavement concrete.

Before the initial setting of the concrete surface, use a large magnesium alloy spatula to smooth the concrete surface.

Use special magnesium alloy edge finishing plaster to finish edges and corners as required.

Spread the colored reinforcement evenly on the concrete surface two times, the first time spreading 2/3 of the standard amount (3kg/6.6lbs per square meter), and the second time spreading the remaining 1/3.

Every time the color reinforcement is sprayed, the magnesium alloy trowel shall be used for leveling and polishing after the color reinforcement is wet so that the color reinforcement can completely cover the concrete surface.

After the initial setting of the color strengthening material, when the surface is dry and there is no obvious moisture, evenly sprinkle the coating powder on the surface, and the standard dosage per square meter is 0.15kg/0.33lbs.

Press the die alternately and progressively. The die shall be formed once to avoid repeated stamping.

Brush the floor surface evenly three days after the completion of the die. A small amount of detergent can be added during cleaning. Cut the expansion joint in time before cleaning.

After the floor surface is completely dry, it must be sprayed with color art floor protective agent, the standard dosage is 0.15kg/0.33lbs per square meter. The protective agent can spray with a roller brush or spray barrel.

Package Included

1* Seamless Concrete Slate Pattern

1* Edge Trimmer

ProductSiteLaunchDate : 2024-09-29T07:39:02.170Z
StreetDate : 2024-02-10T00:00:01Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword : Women
TargetAudienceKeyword1 : Metalsmiths
TargetAudienceKeyword2 : Jewelers
TargetAudienceKeyword3 : Metalworkers
UnitCount : 1
UnspscCode : 52150000
WarrantyDescription : 2 Year Manufacturer