Cart 2 india

Specification
Brand : Acnoc
BulletPoint1 : 14 in 1 Water Test Strips , Water Test for Drinking Water, Pool, Spa Water, Fast and Accurate Detect pH, Total alkalinity, Hardness, Bromine, Lead, Iron, Copper, Nitrate, Nitrite, Total chorine, Cyanuric acid, Chromium/Cr, Fluride, Residual chlorine
BulletPoint2 : Simply dip one test strip into the water and wait for 5 seconds. Remove the test stip, hold it horizontally for 30 seconds, and then compare it to the Tatal Alkainity, pH, Iron, Copper, Lead, Total Hardness, and Free Chlorine against the color on chart to get a rought estimate.
BulletPoint3 : Please refer to the out-side box and bottle label for the specific test parameters of the product you are using. And please read this direction carefully before using.
BulletPoint4 : ★Test: TC, CL, pH, ALK, CYA, -TH
BulletPoint5 : ★100% Satisfaction Guaranteed: If you are not satisfied for any reason, please let us know immediately, we will serve for you till you satisfied 100%!
Color : As pictures shown
ExternallyAssignedProductIdentifier : 7447550045106
ExternallyAssignedProductIdentifier1 : 0606479878654
ExternallyAssignedProductIdentifier2 : 606479878654
ItemName : 14 in 1 Water Test 100 Strips, Test for Drinking Water, Pool, Spa, Fast and Accurate Detect pH, Total Alkalinity, Hardness, Bromine, Lead, Iron, Copper, Nitrate, Total chorine, Cyanuric Acid
ItemPackageQuantity : 4
ItemTypeKeyword : swimming-pool-testing-strips
Manufacturer : Vansful
Material : Paper
NumberOfItems : 1
PartNumber : w-14
ProductDescription : Usage: 1. Water test strips are made for water quality testing of both qualitative and semi-qualitative. It can test totally 14 items in water: pH, Total alkalinity, Hardness, Bromine, Lead, Iron, Copper, Nitrate, Nitrite, Total chorine, Cyanuric acid, Chromium/Cr, Fluride, Residual chlorine. Please refer to the out-side box and bottle label forthe specific test parameters of the product you are using. And please read this direction carefully before using. 2. Testing conditions and ranges:Test your sample at Ambient temperature between 2C -30 C，and relative humiditys80. For Drinking water, Pool, Spa, Ponds, Aquarium and Industrial waste water, etc. Important: Storage Instructions: 1. Please carefully read the storage instructions in the bottle and label. Proper storage and handling procedures must be fllowed to avoid deterioration of the product both during the storage and handling. 2. Store in dry condition, keep away from direct sunlight and moistureAlways keep the cap tight on your strip container in between uses and always leave desiccant in the bottle. 3. Do not touch any areas of the test pad of the reagent strips. 4. Do NOT drink the water sample that the strip was immersed in. 5. Use strips before the expiry date. 6. Discard the water sample properly. 7. Please fllow these instructions to ensure that you obtain proper results. a. Collect water sample to be tested in a vial, cup or container. b. Immerse the test strip in the desired water sample and remove within 1-2 seconds. c. Hold the strip horizontally and gently tap or shake to remove excess water. Take extra precaution to ensure that the water from the test pads don't bleed into each other. Read the test results carefully within 60 seconds in a good light and with the test area held near the color chart onthe botle label. Changes in color that appear only along the edges of the test pads or after moving than
ProductSiteLaunchDate : 2020-11-18T09:02:43.922Z
Size : 50strips
UnitCount : 1