SparkFun Environmental Sensor - BME688 (Qwiic) - Gas scanning sensor - Temperature Humidity Barometric Pressure - Scan for VOCs VSCs and other gasses in The parts per billion range ppb

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 5500/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
AgeRangeDescription : Adult
Alarm : Audible
Brand : SparkFun
BulletPoint1 : Features: Uses I2C interface (Qwiic-enabled): I2C Addresses: 0x76 (Default) or 0x77, 2x Qwiic Connectors; Operating voltage range: 1.71V - 3.6V, Typically 3.3V if using the Qwiic cable; Typical current consumption (varies based on mode and active sensor): 2.1 µA to 18mA, 0.15 µA (sleep mode), 3.9 mA in standard gas scan mode
BulletPoint2 : Relative humidity: Operating range: 0% to 100%, Absolute Accuracy: ±3%RH, Resolution: ±0.008%RH; Temperature: Operating range: -40°C to +85 °C, Absolute Accuracy: ±1.0°C, Resolution: 0.01°C
BulletPoint3 : Pressure: Operating range: 300hPa - 1100hPa, Absolute accuracy: ±60Pa (0°C to 65°C), Resolution: 0.18PA, highest oversampling; Gas: F1 score for H₂S scanning: 0.92, Standard scan speed: 10.8 sec/scan, Sensor-to-sensor deviation: ± 15% ± 15
BulletPoint4 : Important: In order to avoid contamination of its gas scanning capabilities, DO NOT touch the metallic casing of the BME688 sensor. Please, handle with care.
BulletPoint5 : Note: While this sensor can be used with the BME AI-Studio and BSEC2 compatible with Arduino library; it is recommended for the AI functionality, users purchase the BME688 Evaluation Board (Coming Soon) for ease of use.
CareInstructions : Wipe Clean
Color : blue
ConnectorType : Screw
ExternallyAssignedProductIdentifier : 8480686164098
ExternallyAssignedProductIdentifier1 : 845156012343
ExternallyAssignedProductIdentifier2 : 0845156012343
ExternallyAssignedProductIdentifier3 : 00070131510785
ItemDisplayWeight : 0.01 pounds
ItemLength : 7 inches
ItemName : SparkFun Environmental Sensor - BME688 (Qwiic) - Gas scanning sensor - Temperature Humidity Barometric Pressure - Scan for VOCs VSCs and other gasses in The parts per billion range ppb
ItemPackageDimensions_Height : 9 centimeters
ItemPackageDimensions_Length : 0.5 centimeters
ItemPackageDimensions_Width : 7.7 centimeters
ItemPackageQuantity : 2
ItemTypeKeyword : industrial-temperature-sensors
Manufacturer : SparkFun Electronics
Material : metal
MeasurementAccuracy : +/- 0.4 F
ModelNumber : SEN-19096
MountingType : Panel Mount
NumberOfBoxes : 1
NumberOfItems : 2
PackageLevel : unit
PartNumber : SEN-19096
ProductDescription : The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The gas sensor on the BME688 can detect a wide variety of volatile organic compounds (VOCs), volatile sulfur compounds (VSCs), and other gases such as carbon monoxide and hydrogen in the part per billion (ppb) range. Combine that with precise temperature, humidity, and barometric pressure and the BME688 can work as a completely standalone environmental sensor all in a 1in. x 1in. breakout!
The sensor communicates via either I2C or SPI. We've broken out the I2C pins to our Qwiic system so no soldering is required to connect it to the rest of your system but if you would prefer, both the I2C and SPI pins are also broken out to standard 0.1in.-spaced pins.
Note: While this sensor can be used with the BME AI-Studio and BSEC2 Arduino library; it is recommended for the AI functionality, users purchase the BME688 Evaluation Board (Coming Soon) for ease of use.
Important: In order to avoid contamination of its gas scanning capabilities, DO NOT touch the metallic casing of the BME688 sensor. Please, handle with care.
The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
ProductSiteLaunchDate : 2022-04-29T07:00:00.000Z
ResponseTime : 6 seconds
Reusability : Reusable
Size : Raindrop Detection Sensor
StreetDate : 2017-03-18T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UpperTemperatureRating : 85 degrees_celsius

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.