Cart 2 india

Specification
Brand : Cooper
BulletPoint : BME280 5V Digital Sensor Temperature Humidity Barometric Pressure Sensor Module I2C SPI 1.8-5V GY-BME280 GY-BME280-5V BME280-5V
BulletPoint1 : Lab equipment & instruments
BulletPoint2 : Made in united states
BulletPoint3 : Manufactured by COLE-PARMER
BulletPoint4 : Country of Origin : United States
BulletPoint5 : EASY TO INSTALL: 100mm probe and 3 meters total length together with a light weight makes the installation firm and simple.
ExternallyAssignedProductIdentifier1 : 845156013470
ExternallyAssignedProductIdentifier2 : 0845156013470
IncludedComponents : Replacement Part
ItemName : Cooper Cooper-Atkins 50012-K 120° Angled Surface Type K Probe, 0.5" Dia Tip
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-temperature-sensors
Manufacturer : COLE-PARMER
Material : Aluminum
ModelNumber : 50012-K
MountingType : Flange Mount
NumberOfItems : 1
PartNumber : 50012-K
PowerSourceType : Corded Electric
ProductDescription : The GY-BME280-5V is a three-in-one module integrating temperature, humidity and air pressure

Onboard LDO can supply 3.3-5V


Product
Descriptions:


ME-BME280 is a Breakout Board featuring Sensortec ME280 Temperature, Humidity & Pressure Sensor.

The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.

Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO.

If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!


Product
Features:


- Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)

- Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V

VDDIO interface voltage range: 1.2 V to 3.6 V

- Current consumption 1.8 uA @ 1 Hz humidity and temperature

2.8 uA @ 1 Hz pressure and temperature

3.6 uA @ 1 Hz humidity, pressure and temperature

0.1 uA in sleep mode

- Operating range -40…+85 C, 0…100 % rel. humidity, 300…1100 hPa- Humidity sensor and pressure sensor can be independently enabled/disabled


BMP280 sensor an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI!


This precision sensor is the best , precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1
ProductSiteLaunchDate : 2015-01-24T07:43:22.444Z
Size : One Size
StreetDate : 2017-06-09T00:00:01Z
Style : Modern
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1