Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : Comark
BulletPoint1 : Type-T thermocouple probe for use in monitoring temperatures of food products
BulletPoint2 : Measures temperature from -148 to +482 degrees F (-100 to +250 degrees C)
BulletPoint3 : Probe measures 3" and has a 1.5mm tip for reduced impact
BulletPoint4 : Coiled lead with a Lumberg locking connector stretches to extend reach
BulletPoint5 : Response time of 0.5 seconds for fast readings
CareInstructions : Wipe Clean
ExternallyAssignedProductIdentifier1 : 095969433907
ExternallyAssignedProductIdentifier2 : 0095969433907
ExternallyAssignedProductIdentifier3 : 00095969433907
IncludedComponents : BME280 Sensor
ItemDisplayDimensions_Length : 12 inches
ItemLength : 3 inches
ItemName : Comark Instruments | PT19L | Penetration Probe with 3" Stem
ItemPackageDimensions_Height : 3.048 centimeters
ItemPackageDimensions_Length : 22.606 centimeters
ItemPackageDimensions_Width : 7.874 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-temperature-sensors
Manufacturer : Comark
Material : PVC
Material1 : silicon
Material2 : copper
MeasurementAccuracy : 300~1100hPa
MeasuringRange : 0℃~65℃
ModelNumber : PT19L
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : PT19L
ProductDescription :
The BME280 is an APSM (Advanced Porous SiliconMembrane) process digital digital composite sensor in a small package with low power consumption, which measures ambient temperature and humidity and atmospheric pressure.
It is backward compatible with the BMP280, and the barometric pressure temperature register control and data readout operate in the same way.
The moisture-sensitive element has fast wake-up and response times, high accuracy and a wide temperature operating range.
The barometric pressure sensitive element is a piezoresistive low noise high accuracy high resolution absolute atmospheric pressure sensing element; and
The temperature sensing element is a low-noise, high-resolution element, and the temperature value is self-correcting for humidity and barometric pressure with temperature compensation.

Operating Voltage:BME280(1.7~3.6VDC)BMP280(5V DC)
Temperature Measurement Range:0℃~65℃
Temperature Measurement Error:±0.5℃ MAXS1℃;Resolution 0.1℃.
Relative Humidity Measurement Range:0%~100
Humidity Response Time:>1s
Relative Humidity Measurement Error:2%
Humidity hysteresis:-1%;Resolution 0.8%
Barometric pressure measurement range:300~1100hPa
Barometric pressure measurement error:±1hPa Resolution 0.18Pa
Digital interface type: I1C (from the mode 3.4MHz) or SPI (3-wire or 4-wire from the mode 10MHz)
Dimensions:15.4mm(L)*11.6mm(W)*2.4mm(H)
With M3 fixing screw holes for easy installation and fixing.

VCc: Power Positive
GND: Ground
SCL: 12C/SPI serial clock line
SDA: 12C serial data line
3-wire SPI serial data input/output port
4-wire SPI serial data input port
CSB: chip select pin, connect high (default) for IC communication interface
Low level is SPI communication interface
SDO: 12C address select bit 4-wire SPI serial output port
 
ProductSiteLaunchDate : 2012-10-30T21:39:29.745Z
ResponseTime : 0.5 seconds
Reusability : Reusable
StreetDate : 2017-06-09T00:00:01Z
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41112200
Wattage : 0.5 watts