Cart 2 india

Specification
Brand : CEMELI
BulletPoint : Thermostats
BulletPoint1 : Ammeters
BulletPoint2 : Digital Temperature Controller 220V Thermostat Regulator Heating Cooling Control Thermoregulator With Alarm 2M Sensor
Color : Stc-3028 Ac110-220v
ControlMethod : remote
ControlType : Button Control
ExternallyAssignedProductIdentifier : 9485557286984
ItemName : STC-1000 STC-3008 STC-3018 STC-3028 LED Digital Temperature Controller Thermostat Thermoregulator Incubator 12V 24V 110V 220V ( Color : STC-3028 AC110-220V )
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : temperature-controllers
Manufacturer : CEMELI
ModelName : CEMELI
ModelNumber : CEMELI
NumberOfItems : 1
PartNumber : CEMELI
ProductDescription : Thermostats
NOTE:
STC-1000 STC-3008 STC-3018 is a Temperature Controller
STC-3028 is a TemperatureandHumidity Controller
STC-1000
Features:
Switch the modes between cool and heat.
Control temperature by setting the temperature setting value and the difference value.
Temperature calibration.
Refrigerating control output delay protection.
Alarm when temperature exceeds temperature limit or when sensor error.
Specifications:Model:STC-1000
Temperature measuring range: -50 ° C ~ 99 ° C
Resolution: 0.1 ° C;
Accuracy:+- 1° C (-50 ° C ~ 70 ° C);
Sensor error delay: 1 minute
Power supply: DC 12V, DC 24V AC AC110-220V
<;3W;
Sensor: NTC sensor (1PC);
Relay contact capacity: Two Relay Cool 10A/250VAC; Heat 10A/250VAC;
Ambient temperature: 0 ° C ~ 60 ° C;
Storage temperature: -30 ° C ~ 75 ° C;
Relative humidity: 20% ~ 85% (No condensate)
Sensor length: 1.0m
STC-3008
Technical Parameters:
Storage temperature: -30-75 Celsius
Ambient temperature: 0-60 Celsius
Relay contact capacity: Cool (10A/240VAC); Heat (10A/240VAC)
Sensor: NTC sensor
<;3w
Power supply: DC 12V DC 24V AC 110-220V
Sensor error delay: 1 minute
Accuracy: 0.1 Celsius
Temperature measuring range: -55-120 Celsius
How to restore factory Settings
Press the"Down 1" and "Down 2" button at the same time, the factory setting is restored
Press the button once to display the stop temperature. Long press the button for about 3 seconds and the stop temperature number flashes. The required temperature can be set by the up and down keys
Set the stop temperature:
Press the "up" button once to display the starting temperature. Long press the "up" button for about 3 seconds,The required temperature can be set by the up and down keys
Set start up temperature:
Code
Function
Set Range
Default
P0
Compressor 1 de
ProductSiteLaunchDate : 2024-01-27T10:04:08.305Z
Size : One Size
Style : Modern
UnitCount : 1
UnspscCode : 41112209
Voltage : 220 volts
Voltage1 : 24 volts
Voltage2 : 12 volts
Voltage3 : 110 volts
Voltage4 : 220 volts