Specification Brand : Miskall BulletPoint1 : The switch is a normally open switch,connect only when temperature standard is reached, otherwise disconnect. BulletPoint2 : The can withstand 220VAC 1.5A or 24VDC 1.5A voltage. BulletPoint3 : High insulation more than 50MOhm in ambient temperature and . BulletPoint4 : Stable performance, high accuracy, small size, light weight. BulletPoint5 : High reliability, long life, and little interference to the radio. Color : #415 ExternallyAssignedProductIdentifier1 : 0717067819963 ExternallyAssignedProductIdentifier2 : 717067819963 IncludedComponents : No ItemName : Miskall JUC-31F KSD-01F Temperature Control Thermostat Switch, Normally Open, Adjustable Range 40 to 130℃ (60℃) ItemPackageDimensions_Height : 1 centimeters ItemPackageDimensions_Length : 4 centimeters ItemPackageDimensions_Width : 2 centimeters ItemTypeKeyword : temperature-controllers Manufacturer : Miskall ModelName : Miskallvke4itzpfy-15 ModelNumber : Miskallvke4itzpfy-15 NumberOfItems : 1 PartNumber : Miskallvke4itzpfy-15 ProductDescription : Item Type:Switch Type :Normally Opened Load:220VAC 1.5A or 24VDC 1.5A Insulation : Normal Temperature And Humidity 50MΩ Temperature:40℃ / 45℃ / 50℃ / 55℃ / 60℃ / 65℃ / 70℃ / 75℃ / 80℃ / 85℃ / 90℃ / 95℃ / 100℃ / 105℃ / 110℃ / 115℃ / 120℃ / 125℃ / 130℃(Optional) : 100 MΩ Electric Strength: 500VAC
Package List: 1 x Switch Note: 1. When using temperature sensing, the metal cover should be close to the mounting surface of the controlled appliance. To ensure the temperature sensing effect, the temperature sensitive surface should be coated with thermal grease or other similar heat transfer medium. 2. Do not crush, loosen or deform the top of the cover during installation to avoid affecting performance. 3, can not let the liquid penetrate into the temperature controller, do not crack the shell, do not arbitrarily change the shape of the external terminal. 4. The product should be used in a circuit with a current of no more than 5A. The copper core should be selected from 0. 5-1mm2 wire connection; if the circuit is not more than 10A, the copper core should be 0.75-1.5mm2. connection. 5. The product should be stored in a warehouse with a relative humidity of less than 90% and an ambient temperature of 40 ° C below, which is ventilated, clean, dry and of corrosive gases.