Cart 2 india

Specification
Brand : Reland Sun
BulletPoint : Automatic heating or cooling according to the temperature
BulletPoint1 : Temperature measurement range: -50 -110 Celsius / Resolution: -9.9-99.9 0.1 Celsius Other temperature range 1 Celsius / Measurement accuracy:0.1 Celsius
BulletPoint2 : Control accuracy: 0.1 Celsius / Hysteresis accuracy: 0.1 Celsius / Refresh frequency: 0.5S/high temperature protection: 0-110 Celsius
BulletPoint3 : Input voltage: DC12V/output: one way 20A relay/power supply: 12V 200MA/machine power consumption: quiescent current 35MA, pull-in current: 65MA
BulletPoint4 : Measurement input: NTC (10K0.5%) waterproof sensor
BulletPoint5 : Environmental requirements: -10 - 60 Celsius, humidity 20% - 85%
Color : Blue,red
ConnectivityProtocol : Wi-Fi
ControllerType : Push Button
ControlType : Button Control
ExternallyAssignedProductIdentifier1 : 0708310808063
ExternallyAssignedProductIdentifier2 : 708310808063
GpsrSafetyAttestation : 1
ItemName : DC12V W1209WK Digital Thermostat Temperature Control Smart Sensor Waterproof NTC Sensor (red blue 12V)
ItemShape : Rectangular
ItemTypeKeyword : temperature-controllers
Manufacturer : Reland Sun
MountingType : Ceiling Mount
NumberOfItems : 1
PartNumber : 5HPRj47WNO1
ProductDescription : Indicator light, digital tube status description:
Indicator light: Off means the relay is off, steady light means the relay is closed.

Instructions:
Key Description: The SET button is also the setting button and the C/F button is the Fahrenheit and Celsius conversion buttons.
Press the SET button while the actual temperature is displayed, the lower setting number flashes (the lower setting temperature flashes), then SET(+) C/F(-) to set the desired setting temperature. 3 seconds automatically confirms the return, at this time the controller automatically performs relay on/off according to the set temperature. The rated output of the thermostat is 12V20A relay, which satisfies all kinds of high power, please ensure the line is correct.
Under normal working conditions, short press the C/F (-) button to switch between Fahrenheit and Celsius.
Under normal working conditions, press and hold the SET button 5S to enter the main menu settings. Press SET (+), C/F (-) to select the P1-P8 mode. After confirming the mode, press and hold SET (+) at the same time. , C / F (-) enter the mode setting parameters. At this time, the number below is flashing, and then the parameters are adjusted by SET (+), C/F (-), and automatically saved after 3S. The setup is complete.

Note:
The installation of electronic modules requires basic knowledge and requires a certain electronic professional foundation and hands-on ability. Please purchase carefully!

Package Includes: 1Pcs
ProductSiteLaunchDate : 2022-01-16T14:40:24.768Z
Size : red blue 12V
Style : Protection
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 41112209
Voltage : 12 volts
Voltage1 : 12 volts
Voltage2 : 220 volts