Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Bolisila
BulletPoint1 : Compact, lightweight, and easy to install.
BulletPoint2 : The compressor protection module is specifically designed to ensure the safe of the compressor.
BulletPoint3 : It can prevent damage to the equipment caused by issues such as overcurrent, overvoltage, undervoltage, and phase loss, thereby extending the service life of the compressor.
BulletPoint4 : Dual Mode Operation: The intelligent speed regulator supports two operating modes (adjustable temperature mode/fixed temperature mode), easily switchable via a mechanical switch on the board.
BulletPoint5 : Easy-to-Install Temperature Sensor: The cooling fan governor comes with a temperature sensing wire and mounting ears for straightforward installation, capable of measuring various surfaces, and includes LED indicators for power and status.
Color : One Color
ExternallyAssignedProductIdentifier : 7679227638476
IncludedComponents : 1 X Fan Temperature Control Speed Regulator
ItemName : Bolisila for Compressor Protection Module OUT69 Y 52 A 282 Motor Protector
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : temperature-controllers
Manufacturer : Bolisila
ModelName : Bolisila
ModelNumber : Bolisila
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Bolisila
ProductDescription : OUT69 Y Motor Protection Module
The product dimensions, installation, wiring and INT69 HBY / JTX-A / JTX-B are the same and completely replace.
The OUT69 Y Motor Protection Module is a miniature controller designed for screw compressor protection.
Used in conjunction with PTC temperature sensors for a variety of motors that require protection.
Voltage monitoring
* Within 5~7S after module initialization, if the motor power phase sequence or phase loss fault is detected, the relay is disconnected and locked. After the motor stops, the power supply voltage is automatically monitored again after 20S.
This product can be used in a variety of ways when it is used. Connecting the L1~L3 of the protector to the output end of the AC contactor can protect the fault caused by the phase failure of the AC contactor or the exchange of the AC contactor. At the same time, the installation position of the product is also more flexible, and the product can be directly installed in the motor junction box.
* After the protector is powered off for 5 seconds, the lock function and delay function are automatically released.
* Two-color indicator (red / green) indicates the motor protector and compressor operating status.
* LED light indication
- The long green light indicates that the protector is working properly;
- The red light flashes to indicate that a fault has occurred.
Dual voltage supply: 50~60HZ 3.0 V A; AC 208~415V±10%, AC 115~230V±10%, AC 24~48V±10%
* Storage temperature: -30-70 ° C
* Temperature measurement circuit: PTC (DIN44081/082)
- Number of sensors: 1 to 9
<;1.8 K
-R action: 4.50 K ± 20%
-R reset: 2.75 K ± 20%
<;30m
* Motor monitoring voltage: 3AC 50/60HZ, 200-575V ± 10%
* Output relay: max AC 240V, max 2.5A, C300; min>24V AC/DC, >20mA.
* Service life: about 1 million times
* Protection level: IP00
* Connection: 6.3mm insert
* Material: PA66, GF25
*Install
ProductSiteLaunchDate : 2024-08-06T07:20:51.639Z
Size : One Size
Style : 12V
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1