Cart 2 india

Specification
Brand : OUCRIY
BulletPoint : 3PCS Electronic Thermostat Controller DC 6-30V 24V Digital Temperature Control Board -50 to +110 Degree Celsius LCD Digital Micro Temp Control Switch Module with Sensor Probe
BulletPoint1 : On board MCU chip for more intelligent control. Wide temperature measuring range 50 110 C, error 0.1 only.
BulletPoint2 : The module has been tested for stability, consistency and reliability.
BulletPoint3 : INTELLIGENT CONTROL: On board MCU chip for more intelligent control.
BulletPoint4 : to Use : When exceeding the measuring range, the temperature controller will force the relay to disconnect
BulletPoint5 : Temperature control range: 50 to 110 C 58 F 230 F ; high : 0.1 C, refresh rate: 0.5S; resolution: when the temperature is 0.1 C, the resolution is 9.9 99.9, Other temperature ranges are 1 C.
ExternallyAssignedProductIdentifier1 : 0763312583271
ExternallyAssignedProductIdentifier2 : 763312583271
IncludedComponents : No
ItemName : 2pcs W1209 DC 12V Digital Thermostat Waterproof Sensor Temperature Control Switch -50~110°C
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : temperature-controllers
Manufacturer : OUCRIY
ModelName : OUCRIYb4c9wktg6e
ModelNumber : OUCRIYb4c9wktg6e
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : OUCRIYb4c9wktg6e
ProductDescription :
Specification:
Item Type: Digital Thermostat
Temperature Sensor Type: NTC(10K 0.5%) waterproof sensor
Display Type: 0.28inch 3-bit digital tube
Temperature Range: -50~110°C
Resolution: 0.1℃ (9.9~99.9℃), 1℃ (other)
Temperature Control Mode: On/Off
Temperature Control Accuracy: 0.1℃
High Temperature Protection: 0-110℃
Refresh Frequency: 0.55s
Return Difference Accuracy: 0.1℃
Input Voltage: DC 12V
Output: 10A One-Channel Relay
Static Current: ≤35MA
Suction Current ≤65MA
Environmental Requirements: -10 ~ 60℃, 20%-85% RH

Instructions:
Long press SET for 5s to get menu, starts at P0, press +/- to get next P-parameter, press set to determine the P-parameter, press +/- to set the desired value for the selected parameter, press SET to accept it, long press +/- reset to default

Indicator & Digital Tube Status Description:
Indicator: Off - The relay is disconnected, ON - The relay is closed
Digital Tube: Display LL - Sensor open circuit; Display HH - Exceed the measuring range, the temperature controller will force the relay to disconnect; Display ----- - High temperature



Package List:
2 x Digital Thermostat




ProductSiteLaunchDate : 2024-09-08T18:02:45.392Z
Style : US Plug
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 41112209