Cart 2 india

Specification
Brand : UCF
BulletPoint : UCF Bearing Cup Only - LM - 67010
BulletPoint1 : SKF-Bearing 30206 J2/Q
BulletPoint2 : For a bearing to work correctly, it must be lubricated. Typically the lubricant is founded on elastohydrodynamic effect (by oil or grease) but operating at excessive temperatures dry lubricated bearings may also be accessible.
BulletPoint3 : The dynamic viscosity that is recommended is proportional to diameter of bearing.
BulletPoint4 : The dynamic viscosity that is recommended falls with frequency that is rotating. As a rough indicator: for less than 3000 RPM, urged viscosity increases with variable 6 for more than 3000 RPM, and for a factor 10 drop-off in rate, recommended viscosity falls with factor 3 for a factor 10 increase in rate.
BulletPoint5 : For a bearing where typical of outer diameter of diameter and bearing of axle hole is 50 millimeters, which is rotating at 3000 RPM, dynamic viscosity that is urged is 12 millimeter²/s.
ExternallyAssignedProductIdentifier : 7440136354326
ExternallyAssignedProductIdentifier1 : 601759059471
ExternallyAssignedProductIdentifier2 : 0601759059471
ItemName : UCF Bearing Cup Only - LM - 67010
ItemPackageDimensions_Height : 0.5 inches
ItemPackageDimensions_Length : 1.5 inches
ItemPackageDimensions_Width : 1.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : tapered-roller-bearings
Manufacturer : Ucf
Material : Steel
NumberOfItems : 1
PartNumber : LM-67010
ProductDescription : Bearing cup for cone bearing. Sold each. Use with MFR #LM-67048
ProductSiteLaunchDate : 2011-06-10T18:20:27.675Z
SpecificationMet : ISO 9001
UnspscCode : 31171500