Cart 2 india

Specification
Brand : TIMKEN
BulletPoint : Manufacturer part number 60422113350
BulletPoint1 : Single cup (outer ring) for connecting to cones (inner ring assemblies, sold separately) to form a complete single tapered roller bearing
BulletPoint2 : Supports both radial and axial loads between a rotating and non-rotating member
BulletPoint3 : Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
BulletPoint4 : High alloy steel for durability and heat tolerance
BulletPoint5 : Open configuration for lubrication applied in place
BulletPoint6 : 6. Convenient maintenance: The design of tapered roller bearings makes maintenance and replacement simple and convenient. Most tapered roller bearings can be installed and removed through the side or end face without disassembling the whole transmission system. In addition, proper lubrication and maintenance can also prolong the service life of tapered roller bearings.
ExternallyAssignedProductIdentifier : 4547359074055
ExternallyAssignedProductIdentifier1 : 053893142210
ExternallyAssignedProductIdentifier2 : 0053893142210
ExternallyAssignedProductIdentifier3 : 00053893142210
IncludedComponents : Tapered Bearing Cup
ItemName : Timken Tapered Roller Bearing Cup - 5335
ItemPackageDimensions_Height : 4.064 centimeters
ItemPackageDimensions_Length : 11.43 centimeters
ItemPackageDimensions_Width : 11.684 centimeters
ItemPackageQuantity : 1
ItemShape : Single Cup
ItemTypeKeyword : tapered-roller-bearings
Manufacturer : Timken
Material : Steel
ModelNumber : 5335
NumberOfItems : 1
PackageLevel : unit
PartNumber : 5335
ProductDescription : 15578/15520【25.4x57.15x17.462mm】 0.22 15578/15523【25.4x60.325x19.83mm】 0.27 15580/15520【26.98x57.15x17.45mm】 0.22 15580/15523【26.98x60.32x19.83mm】 0.25 15590/15520【28.57x57.1x17.47mm】   0.21 15590/15523【28.57x60.32x19.8mm】   0.25 M201047/M201011【39.68mmx73.025x5.65】 0.44 Tapered roller bearing refers to a radial thrust rolling bearing with tapered rollers as rolling elements. There are two kinds of small cone angles and large cone angles. The small cone angle mainly bears the combined radial and axial loads, which are mainly radial loads. It is often used in pairs and installed in reverse. The inner and outer races can be installed separately, and the radial and axial clearances can be adjusted during installation and use. The large cone angle mainly bears the combined axial and radial loads, which are mainly axial loads. Generally, it is not used to bear the pure axial load alone, but can be used to bear the pure radial load when it is configured in pairs (the ends with the same name are relatively installed).
ProductSiteLaunchDate : 2010-10-31T03:30:09.797Z
Size : 0.130" Max Housing Fillet Radius
SpecificationMet : Abec
Style : Straight Outside Diameter
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1