Cart 2 india

Specification
Brand : TIMKEN
BulletPoint1 : Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing
BulletPoint2 : Supports both radial and axial loads between a rotating and non-rotating member
BulletPoint3 : Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F)
BulletPoint4 : Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise
BulletPoint5 : Open configuration for lubrication applied in place
BulletPoint6 : 6. Convenient maintenance: The design of tapered roller bearings makes maintenance and replacement simple and convenient. Most tapered roller bearings can be installed and removed through the side or end face without disassembling the whole transmission system. In addition, proper lubrication and maintenance can also prolong the service life of tapered roller bearings.
ExternallyAssignedProductIdentifier1 : 053893428215
ExternallyAssignedProductIdentifier2 : 0053893428215
ExternallyAssignedProductIdentifier3 : 00053893428215
IncludedComponents : Tapered Bearing Cone
ItemName : Timken Tapered Roller Bearing Cone - M88048S
ItemPackageDimensions_Height : 2.54 centimeters
ItemPackageDimensions_Length : 7.62 centimeters
ItemPackageDimensions_Width : 7.366 centimeters
ItemPackageQuantity : 1
ItemShape : Single Cone
ItemTypeKeyword : tapered-roller-bearings
Manufacturer : Timken
Material : Steel
ModelNumber : M88048S
NationalStockNumber : 3110-00-100-3084
NumberOfItems : 1
PackageLevel : unit
PartNumber : M88048S
ProductDescription : Tapered roller bearing refers to a radial thrust rolling bearing with tapered rollers as rolling elements. There are two kinds of small cone angles and large cone angles. The small cone angle mainly bears the combined radial and axial loads, which are mainly radial loads. It is often used in pairs and installed in reverse. The inner and outer races can be installed separately, and the radial and axial clearances can be adjusted during installation and use. The large cone angle mainly bears the combined axial and radial loads, which are mainly axial loads. Generally, it is not used to bear the pure axial load alone, but can be used to bear the pure radial load when it is configured in pairs (the ends with the same name are relatively installed).
ProductSiteLaunchDate : 2005-11-04T20:14:13-00:00
Size : 0.160" Max Shaft Fillet Radius
SpecificationMet : Abec
StreetDate : 2017-11-25T00:00:01Z
Style : Straight Bore
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31171500