Cart 2 india

Specification
Brand : NTN
BulletPoint1 : Single cone (inner ring) for connecting to compatible straight or flanged cups (outer rings, sold separately) to form a complete single tapered roller bearing
BulletPoint2 : Supports both radial loads and thrust loads in one direction
BulletPoint3 : Through-hardened alloy steel for strength and durability
BulletPoint4 : Heat-treated rollers with a layer of Austenite that increases compressive load capacity, corrosion resistance, and service life
BulletPoint5 : Steel cage evenly spaces rollers for reduced friction, vibration and noise
Color : Black
CompatibleDevices : Car
ExternallyAssignedProductIdentifier : 4547359512069
ExternallyAssignedProductIdentifier1 : 4547359405538
ExternallyAssignedProductIdentifier2 : 04547359405538
IncludedComponents : HTB High Torque Synchronous Belt
ItemName : NTN 64450 Tapered Roller Bearing, Single Cone, Standard Tolerance, Straight Bore, Steel, Inch, 4-1/2" Bore, 1 5/8" Width
ItemPackageDimensions_Height : 5.08 centimeters
ItemPackageDimensions_Length : 17.526 centimeters
ItemPackageDimensions_Width : 17.78 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : tapered-roller-bearings
Manufacturer : NTN Corporation
Material : Steel
ModelNumber : 64450
NumberOfItems : 1
PartNumber : 64450
ProductDescription : Descriptions
V-belts are the most common type of drive belt used for power transmission. They provide the best combination of traction, speed transfer, load distribution, and extended service life.
The 3V v-belt is made of neoprene rubber material, which provides excellent wear resistance, corrosion resistance, and high-temperature resistance.
It contains a high-density polyester hard cord inside, which is specially engineered and twisted, offering high strength and extremely low extensibility.
Fit for many industrial machinery, appliances, agricultural equipment, and power tools, such as tractors, motors, pumps, and compressors.
Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys, and shaft too great.
How to measure the length of the required belt?Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

ProductSiteLaunchDate : 2015-11-11T13:42:19.321Z
Size : 0.140" Maximum Shaft Fillet Radius
SpecificationMet1 : ISO 9001
SpecificationMet2 : ISO 16949
StreetDate : 2017-03-12T00:00:01Z
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 26111500