Cart 2 india

Specification
Brand : Martin
BulletPoint1 : Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
BulletPoint2 : Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
BulletPoint3 : Sintered steel for greater strength and resistance to wear than steel
BulletPoint4 : Keyed to the shaft to prevent the shaft from rotating in the bushing
BulletPoint5 : Interchangeable with taper bushings from various manufacturers
ExternallyAssignedProductIdentifier : 4680708370757
ExternallyAssignedProductIdentifier1 : 697950034218
ExternallyAssignedProductIdentifier2 : 0697950034218
ExternallyAssignedProductIdentifier3 : 00697950034218
IncludedComponents : (2) Set Screws
ItemName : Martin 1615 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63" Bore, 2.25" OD, 1.5" Length
ItemPackageDimensions_Height : 3.81 centimeters
ItemPackageDimensions_Length : 6.35 centimeters
ItemPackageDimensions_Width : 6.096 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : taper-lock-locking-bushings
Manufacturer : MARTIN
Material : Steel
ModelNumber : 1615 1-5/8
NumberOfItems : 1
PartNumber : 1615 1 5/8
ProductDescription : 1210X1-1/8-A Taper Lock Bushing, Bushing Type Taper Lock, Bore Diameter 1 1/8 in, Length 1 in, Bolt Circle Diameter 1.75 in, Bolt Size Not Applicable, System of Measurement Inch, Fastener Tightening Torque Capacity 3,600 in-lb, Flange Type Flangeless, Flange Width Not Applicable, For Shaft Type Keyed, Includes (2) Set Screws, Keyway Height 1/8 in, Keyway Width 1/4 in, Length Less Flange Not Applicable, Material Steel, Overall Diameter 1.875 in, Taper 8 Degrees
ProductSiteLaunchDate : 2010-11-10T08:00:01.000Z
SupplierDeclaredDgHzRegulation : not_applicable