Cart 2 india

Specification
Brand : Beufee
BulletPoint1 : EASY TO USE: Before caulking tape installation, please clean the area and keep it dry. Cut the bathtub sealing tape as needed, peel off the plastic film and stick the tile joint strip, then press hard and use a small shovel to smooth it out, making it smoother and more beautiful
BulletPoint2 : EASY TO INSTALL: White caulk sealing tape with self adhesive back adhesive, strong adhesion, not easy to fall, the installation is simple, before installation, please clean the part and dry it, and cut out the length as needed
BulletPoint3 : EASY TO CLEAN: The self-adhesive sealant tape keep kitchen and bathroom neat, daily wiping is all it takes to keep s as clean as new, whether it is glass , wood , metal , plastic , tile , marble , our tape can be used
BulletPoint4 : UNIQUE DESIGN: The leakage proof strip has smoothly and beautiful , with center crease line and 90° bend for tightly sealing the gaps, also can be used for existing caulking, to achieve the finishing effect
BulletPoint5 : WIDELY USED: The bathtub sealing strip has widely use, such as sinks, kitchen gas stove, bathroom sink, bottom corners of bathtub, bottom edges of wall and wall gaps, to keep your kitchen and bathroom clean and tidy
IncludedComponents : No
ItemName : 2PCS Caulk Tape, 22mm Toilet Caulk Strip Self Adhesive Caulking Tape Gaps Strip Bathtub Sealing Strip Tape for Kitchen Bathroom
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 16 centimeters
ItemPackageDimensions_Width : 13 centimeters
ItemTypeKeyword : tape-caulk
Manufacturer : Beufee
ModelName : Beufeea4nogq5tik
ModelNumber : Beufeea4nogq5tik
NumberOfItems : 1
PartNumber : Beufeea4nogq5tik
ProductDescription : Condition: Brand New
Item Type: Gaps Strip
Material: PE + Rubber
Color: White
Using Temperature: -40℃-100℃
Width: Approx. 2.2cm / 0.9in
Length: Approx. 3.35m / 11ft
Weight: Approx. 149g / 5.3oz

Package List：
2 x Gaps Strip
2 x User Manual

Note:
1. Clean the parts to be sealed firstly and keep them dry;
2. Before use, firstly measure the length dimension of the required sealing part accurately;
3. Take out the product, measure the same length of the strip and the sealed part again and cut it;
4. Firstly peel off the 5cm length of the adhesive tape on the back of the product and fold it to 90°, and then fix the strip on the to be pasted; continue to peel the adhesive tape until all installations are completed;
5. When the product is pasted at a 90° turn, cut each side of the joint into a 45° mating interface.
6. The temperature range of the installation room is preferably around 25℃, if the temperature is too low, the adhesive can be pasted after heating the adhesive with a hair dryer;
7. After the product is pasted, it will be pressed hard to make it stick more firmly;
8. After the product is pasted, do not mix with water within 24 hours and keep it dry.


ProductSiteLaunchDate : 2025-02-25T12:17:13.595Z
UnitCount : 1
UnspscCode : 31201500