Cart 2 india

Specification
Brand : Respicefinem
BulletPoint1 : digital tachometer measurement up to 9999rpm.
BulletPoint2 : digital tachometer lathe, display 0.56inch 4 digit screen clearly display rpm readings in green
BulletPoint3 : package list: tachometer, hall proximity, round magnet, cable.ideal replacement for the thermal.
BulletPoint4 : package list: tachometer, hall proximity, round magnet, cable.
BulletPoint5 : 24v wide supply voltage, suitable for various applications of rpm measurement.
Color : Blue
ExternallyAssignedProductIdentifier : 5602528627445
ExternallyAssignedProductIdentifier1 : 0635401835533
ExternallyAssignedProductIdentifier2 : 635401835533
IncludedComponents : fiber identifier
ItemName : Respicefinem Hall Effect RPM Tachometer Tachometer Green 4 Digit Motor Tachometer RPM Measure Meter npn Hall Proximity Sensor Tachometer Tachometer Hall Effect RPM tachome
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemTypeKeyword : industrial-tachometers
Manufacturer : Respicefinem
MeasurementAccuracy : 0.01
ModelName : Respicefinemoph4kuqnb7
ModelNumber : Respicefinemoph4kuqnb7
NumberOfItems : 1
PartNumber : Respicefinemoph4kuqnb7
PowerSourceType : Battery Powered
ProductDescription : Item Type: Tachometer
Operating Voltage: DC 8-24V, 40mA
Display: 0.56inch green LED, 4 digit reading
Measuring Range: 10-9999rpm
Measuring Accuracy: ±0.1%, reading±1digit
Display Refresh Rate: >3 times/sec
Overrange Display: Display 1 or -1 in the first digit position, none in the last three digit positions
Hall Proximity Switch Type: NPN NO
Tachometer Size: 79x26x43mm / 3.11x1.02x1.69in

Package List：
1 x LED Tachometer
1 x Hall Proximity Switch
1 x Round Magnet
1 x Cable

Note:
1. Connect the plug correctly according to the wiring diagram.
2. The Hall switch is an NPN normally open type, and the detection distance of the Hall switch needs to be within 10 mm. The Hall switch is installed with a diameter of 12 mm and a wire length of 1m or less.
3. Avoid strong electromagnetic interference, the measurement wire is best to use shielded wire or twisted pair wire.
5. Avoid the same tube or stranded wiring with strong electric wires or power wires to avoid unnecessary interference. If necessary, please use shielded wires, and the shielding layer is connected to the counting terminal +.
6. It is not recommended to use mechanical switches or micro switches, because their life is relatively short, it is easy to miscount after a long time; if using mechanical switches or micro switches, please try to use better quality one, so as not to m
7.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

ProductSiteLaunchDate : 2024-04-22T04:47:25.788Z
Style : Fiber identifier
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1