Cart 2 india

Specification
Brand : Locadence
BulletPoint1 : [PRECISE LED DISPLAY] 0.56-inch 4-digit LED screen displays RPM readings in green, ensuring clear visibility.
BulletPoint2 : [EXCELLENT ACCURATE] Equipped with a 3-wire NPN Hall Proximity Switch Sensor for high accurate measurement.
BulletPoint3 : [REVOLUTION SPEED] Capable of measuring revolution speeds up to 9999rpm for accurate results.
BulletPoint4 : [STABLE PERFORMANCE] Provides quick response and stable operation, ensuring reliable RPM measurement.
BulletPoint5 : [WIDE VOLTAGE RANGE] Operates on an 8-24V supply, making it suitable for a variety of RPM speed measurement applications.
ExteriorFinish : Machined
ExternallyAssignedProductIdentifier : 7903692392367
FitType : Universal
IncludedComponents : No
ItemName : LOCADENCE Tachometer, DC 8V~24V 40mA LED Screen Clearly Display 10~9999Rpm Motor Tachometer with 3 Wire NPN Hall Proximity Switch Sensor for RPM Speed Measurement
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-tachometers
Manufacturer : Locadence
ModelName : Locadence45rbfptgzs
ModelNumber : Locadence45rbfptgzs
NumberOfItems : 1
PartNumber : Locadence45rbfptgzs
ProductDescription : Specification
Item Type: Tachometer
Operating Voltage: DC 8-24V, 40mA
Display: 0.56inch green LED, 4 digit reading
Measuring Range: 10-9999rpm
Measuring Accuracy: ±0.1%, reading±1digit
Display Refresh Rate: >3 times/sec
Overrange Display: Display 1 or -1 in the first digit position, none in the last three digit positions
Hall Proximity Switch Type: NPN NO
Tachometer Size: 79x26x43mm / 3.11x1.02x1.69in

Package List
1 x LED Tachometer
1 x Hall Proximity Switch
1 x Round Magnet
1 x Cable

Note
1. Connect the plug correctly according to the wiring diagram.
2. The Hall switch is an NPN normally open type, and the detection distance of the Hall switch needs to be within 10 mm. The Hall switch is installed with a diameter of 12 mm and a wire length of 1m or less.
3. Avoid strong electromagnetic interference, the measurement wire is best to use shielded wire or twisted pair wire.
4. The counter signalisation and the clear signalisation input switch or circuit should be as close as possible to the terminals of the counter to make the signalisation line as short as possible.
5. Avoid the same tube or stranded wiring with strong electric wires or power wires to avoid unnecessary interference. If necessary, please use shielded wires, and the shielding layer is connected to the counting terminal +.
6. It is not recommended to use mechanical switches or micro switches, because their life is relatively short, it is easy to miscount after a long time; if using mechanical switches or micro switches, please try to use better quality one, so as not to m
7.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
ProductSiteLaunchDate : 2024-04-17T07:21:35.427Z
WarrantyDescription : Manufacturer warranty for 90 day