Cart 2 india

Specification
AgeRangeDescription : adult
Brand : FTVOGUE
BulletPoint1 : [Clear Display] 0.56-Inch 4-digit led screen shows rpm readings in green for easy visibility.
BulletPoint2 : [ Performance] Offers high precision, quick response, and stable operation.
BulletPoint3 : [Wide Compatibility] Operates on 8-24v supply voltage, suitable for various rpm speed measurement applications.
BulletPoint4 : [Precise Measurement] Equipped with a 3-wire npn hall proximity switch sensor for accurate readings.
BulletPoint5 : [High Speed] Capable of measuring revolution speeds up to 9999rpm.
Color : Multicolor
ExternallyAssignedProductIdentifier : 7677720012502
ExternallyAssignedProductIdentifier1 : 0670008841570
ExternallyAssignedProductIdentifier2 : 670008841570
ItemName : High Precision 4 Digit LED Tachometer Proximity Switch with NPN Hall Proximity Sensor, Quick Response RPM Speed Measure Meter (Speedometer)
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-tachometers
Manufacturer : FTVOGUE
ModelName : FTVOGUEkwiagq2ur5-11
ModelNumber : FTVOGUEkwiagq2ur5-11
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FTVOGUEkwiagq2ur5-11
ProductDescription : Spec:

Item Type: Tachometer
Display: 0.56inch green LED, 4 digit reading
Measuring Range: 10-9999rpm
Measuring Accuracy: ±0.1%, reading±1digit
Display Refresh Rate: >3 times/sec
Overrange Display: Display 1 or -1 in the first digit position, none in the last three digit positions
Hall Proximity Switch Type: NPN NO
Tachometer Size: 79x26x43mm / 3.11x1.02x1.69in

Package List:
1 x LED Tachometer
1 x Hall Proximity Switch
1 x Round Magnet
1 x Cable

Note:
1. Connect the plug correctly according to the wiring diagram.
2. The Hall switch is an NPN normally open type, and the detection distance of the Hall switch needs to be within 10 mm. The Hall switch is installed with a diameter of 12 mm and a wire length of 1m or less.
3. Avoid strong electromagnetic interference, the measurement wire is best to use shielded wire or twisted pair wire.
4. The counter and the clear input switch or circuit should be as close as possible to the terminals of the counter to make the line as short as possible.
5. Avoid the same tube or stranded wiring with strong electric wires or power wires to avoid unnecessary interference. If necessary, please use shielded wires, and the shielding layer is connected to the counting terminal +.
6. It is not recommended to use mechanical switches or micro switches, because their life is relatively short, it is easy to miscount after a long time; if using mechanical switches or micro switches, please try to use better quality one, so as not to miscount, magnetic switch is strong recommended.

ProductSiteLaunchDate : 2024-10-04T17:02:21.598Z
Size : speedometer
UnitCount : 1
UnspscCode : 26111700