Cart 2 india

Specification
Brand : Generic
BulletPoint1 : [ACCURATE RPM READINGS] - The 0.56-inch 4-digit LED screen clearly displays RPM readings in green, ensuring accurate measurement.
BulletPoint2 : [HIGH ] - With a measuring accuracy of ±0.1% and quick response, this tachometer provides reliable and RPM speed measurement.
BulletPoint3 : [NPN HALL PROXIMITY SENSOR] - Equipped with a 3-wire NPN Hall Proximity Switch Sensor, this tachometer offers stable and reliable revolution speed measurement.
BulletPoint4 : [WIDE SUPPLY VOLTAGE] - With a wide supply voltage range of 8-24V, this tachometer is suitable for various applications of RPM speed measurement.
BulletPoint5 : [COMPACT DESIGN] - Measuring 79x26x43mm, this tachometer is compact and easy to install, making it suitable for a wide range of applications.
Color : As shown
ExternallyAssignedProductIdentifier : 7640283986078
IncludedComponents : No
ItemName : Generic Motor Tachometer RPM Speed Measure Meter, Green 4 Digit LED Display, NPN Hall Proximity Switch Sensor, 8-24V Voltage, High (Speedometer), Generics0rcwmtk71-11
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : tachometers
Manufacturer : Generic
Material : Plastic
MeasurementAccuracy : 0.1mm
ModelName : Generics0rcwmtk71-11
ModelNumber : Generics0rcwmtk71-11
NumberOfItems : 1
PartNumber : Generics0rcwmtk71-11
ProductDescription : Spec:

Item Type: Tachometer
Operating Voltage: DC 8-24V, 40mA
Display: 0.56inch green LED, 4 digit reading
Measuring Range: 10-9999rpm
Measuring Accuracy: ±0.1%, reading±1digit
Display Refresh Rate: >3 times/sec
Overrange Display: Display 1 or -1 in the first digit position, none in the last three digit positions
Hall Proximity Switch Type: NPN NO
Tachometer Size: 79x26x43mm / 3.11x1.02x1.69in



Package List:
1 x LED Tachometer
1 x Hall Proximity Switch
1 x Round Magnet
1 x Cable


Note:
1. Connect the plug correctly according to the wiring diagram.
2. The Hall switch is an NPN normally open type, and the detection distance of the Hall switch needs to be within 10 mm. The Hall switch is installed with a diameter of 12 mm and a wire length of 1m or less.
3. Avoid strong electromagnetic interference, the measurement wire is best to use shielded wire or twisted pair wire.
4. The counterand the clearinput switch or circuit should be as close as possible to the terminals of the counter to make theline as short as possible.
5. Avoid the same tube or stranded wiring with strong electric wires or power wires to avoid unnecessary interference. If necessary, please use shielded wires, and the shielding layer is connected to the counting terminal +.
6. It is not recommended to use mechanical switches or micro switches, because their life is relatively short, it is easy to miscount after a long time; if using mechanical switches or micro switches, please try to use better quality one, so as not to m
7.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.


ProductSiteLaunchDate : 2024-03-31T01:43:47.577Z
Size : speedometer
Style : speedometer
UnitCount : 1