Cart 2 india

Specification
Brand : EIMSOAH
BulletPoint : AZ8000
BulletPoint1 : [High Speed] Measures revolution speed up to 9999rpm with precision.
BulletPoint2 : [Precise Measurement] RPM meter equipped with a 3-wire npn hall proximity switch sensor.
BulletPoint3 : [Stable and Digital tachometer offers quick response and
BulletPoint4 : [Wide Voltage Range] Supports 8‑24v, ideal for various rpm speed measurements.
BulletPoint5 : [Clear Display] 0.56Inch 4‑Digital LED Tachometer screen shows rpm in green.
Color : Red
ExternallyAssignedProductIdentifier : 7642780360351
ExternallyAssignedProductIdentifier1 : 0759953246217
ExternallyAssignedProductIdentifier2 : 759953246217
IncludedComponents : standard configuration
ItemName : Digital Tachometer, RPM Meter, Green 4 Digit LED Motor Tachometer RPM Speed Measure Meter, NPN Hall Proximity Switch Sensor for Lathes, Conveyor Belts (Speedometer)
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-tachometers
Manufacturer : EIMSOAH
Material : Acrylonitrile Butadiene Styrene (ABS)
MeasurementAccuracy : 60
ModelName : EIMSOAH5dwrgvqx8n-11
ModelNumber : EIMSOAH5dwrgvqx8n-11
NumberOfItems : 45
PartNumber : EIMSOAH5dwrgvqx8n-11
ProductDescription : Spec:

Item Type: Tachometer
Display: 0.56inch green LED, 4 digit reading
Measuring Range: 10-9999rpm
Measuring Accuracy: ±0.1%, reading±1digit
Display Refresh Rate: >3 times/sec
Overrange Display: Display 1 or -1 in the first digit position, none in the last three digit positions
Hall Proximity Switch Type: NPN NO
Tachometer Size: 79x26x43mm / 3.11x1.02x1.69in



Package List:
1 x LED Tachometer
1 x Hall Proximity Switch
1 x Round Magnet
1 x Cable


Note:
1. Connect the plug correctly according to the wiring diagram.
2. The Hall switch is an NPN normally open type, and the detection distance of the Hall switch needs to be within 10 mm. The Hall switch is installed with a diameter of 12 mm and a wire length of 1m or less.
3. Avoid strong electromagnetic interference, the measurement wire is best to use shielded wire or twisted pair wire.
4. The counter and the clear input switch or circuit should be as close as possible to the terminals of the counter to make the line as short as possible.
5. Avoid the same tube or stranded wiring with strong electric wires or power wires to avoid unnecessary interference. If necessary, please use shielded wires, and the shielding layer is connected to the counting terminal +.
6. It is not recommended to use mechanical switches or micro switches, because their life is relatively short, it is easy to miscount after a long time; if using mechanical switches or micro switches, please try to use better quality one, so as not to miscount, magnetic switch is strong recommended.


ProductSiteLaunchDate : 2024-08-06T10:25:59.686Z
Size : speedometer
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41110000