Cart 2 india

Specification
Brand : ZJchao
BulletPoint : Motors
BulletPoint1 : [Wide Compatibility] Compatible with 8‑24v supply voltage, suitable for various rpm speed measurement applications.
BulletPoint2 : [Clear Display] 0.56-Inch 4‑digit led screen shows rpm readings in green.
BulletPoint3 : [ Performance] High precision, quick response, stable, and operation.
BulletPoint4 : [Versatile Sensor] Equipped with a 3-wire npn hall proximity switch sensor.
BulletPoint5 : [High-speed Measurement] Revolution speed measurement capability up to 9999rpm.
Color : Blue
ExternallyAssignedProductIdentifier : 7680440011267
ExternallyAssignedProductIdentifier1 : 0769902980468
ExternallyAssignedProductIdentifier2 : 769902980468
IncludedComponents : No
ItemName : Digital Motor Tachometer RPM Speed Measure Meter Green LED NPN Hall Proximity Switch Sensor 8-24V for Various Applications (Speedometer)
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-tachometers
Manufacturer : ZJchao
Material : plastic casing
ModelName : ZJchao09ms6o1tnp-11
ModelNumber : ZJchao09ms6o1tnp-11
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : ZJchao09ms6o1tnp-11
PowerSourceType : hand_powered
ProductDescription : [Wide Compatibility] Compatible with 8‑24v supply voltage, suitable for various rpm speed measurement applications.
[Clear Display] 0.56-Inch 4‑digit led screen shows rpm readings in green.
[ Performance] High precision, quick response, stable, and operation.
[Versatile Sensor] Equipped with a 3-wire npn hall proximity switch sensor.
[High-speed Measurement] Revolution speed measurement capability up to 9999rpm.

Spec:

Item Type: Tachometer
Display: 0.56inch green LED, 4 digit reading
Measuring Range: 10-9999rpm
Measuring Accuracy: ±0.1%, reading±1digit
Display Refresh Rate: >3 times/sec
Overrange Display: Display 1 or -1 in the first digit position, none in the last three digit positions
Hall Proximity Switch Type: NPN NO
Tachometer Size: 79x26x43mm / 3.11x1.02x1.69in



Package List:
1 x LED Tachometer
1 x Hall Proximity Switch
1 x Round Magnet
1 x Cable


Note:
1. Connect the plug correctly according to the wiring diagram.
2. The Hall switch is an NPN normally open type, and the detection distance of the Hall switch needs to be within 10 mm. The Hall switch is installed with a diameter of 12 mm and a wire length of 1m or less.
3. Avoid strong electromagnetic interference, the measurement wire is best to use shielded wire or twisted pair wire.
4. The counter and the clear input switch or circuit should be as close as possible to the terminals of the counter to make the line as short as possible.
5. Avoid the same tube or stranded wiring with strong electric wires or power wires to avoid unnecessary interference. If necessary, please use shielded wires, and the shielding layer is connected to the counting terminal +.
6. It is not recommended to use mechanical switches or micro switches, because their life is relatively short, it is
ProductSiteLaunchDate : 2024-10-21T07:39:01.513Z
Size : speedometer
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 41110000