Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Wuden
BulletPoint : Encoders
BulletPoint1 : The PPM Encoder plugs into the PWM servo output ports of any R/C receiver and encodes them into a PPM pulse suitable for many autopilots (e.g. ). Modifications to the R/C receiver are not necessary.
BulletPoint2 : The whole project is based around the ATMEGA328p AVR processor and all timing is done within interrupts so accuracy and stability is optimized.
BulletPoint3 : Important Note: The firmware comes pre-configured to read 8 Channels. In case you would like to change the settings of the PPM encoder to invert the PPM signal and change the fail safe pre-defined values you need an AVR ISP programmer in order to reprogram it.
BulletPoint4 : The design of the PPM Encoder is based on the Paperazzi PPM Encoder.
BulletPoint5 : The jumper on the board no soldering default. In this case the board powered by FC
Color : Black
ExternallyAssignedProductIdentifier : 7320569013512
ItemName : Wuden PPM Encoder Decoder Board for PX4 Pixhawk2.4. Controller 8 Channel PPM Encoder V1.0 for RC Receiver
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : switch-encoders
Manufacturer : Wuden
Material : Composite Materials
ModelName : VLAWSCDQ
ModelNumber : VLAWSCDQ
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : VLAWSCDQ
ProductDescription : Colour:Black
Material:Composite Materials

Package Contents:
1 x PPM Decoder Board
1 x Cable

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
ProductSiteLaunchDate : 2025-05-14T07:51:27.970Z
Size : One Size
UnitCount : 1