SpecificationBrand : MGT
BulletPoint1 : The encoder contains a PCB, a magnetic ring and a bracket
BulletPoint2 : Specification:PCB Outer Diameter Dimension: 48mm; Bore:15mm; Thickness:1mm; Magnetic ring Diameter:35mm; Bore:8mm ;Thickness:5.6mm; Pulse Count:100/400ppr;Output Type:square wave double phase
BulletPoint3 : Feature:Simple structure, and easy installation; Dual quadrature outputs; Non-contact, no wear, long service life;Superior temperature stability;High sensitivitts a wide voltage range
BulletPoint4 : Wiring Diagram: GND - Encoder Power-; A - Quad encoder A signal; VDD - Encoder Power+; B –Quad encoder B signal
BulletPoint5 : Quality Guarantee: All quality problems, please send us e-mail firstly, we will give you satisfactory solution, and we're concentrating on our constant improvement of product quality and customer service
Color : Multiple Colors
ExternallyAssignedProductIdentifier : 18488028366350
ExternallyAssignedProductIdentifier1 : 0783971927698
ExternallyAssignedProductIdentifier2 : 783971927698
ItemName : MGT050-48 Motor Encoder Incremental magnetic encoder 100/400PPR (400PPR)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : switch-encoders
Manufacturer : HANGZHOU MAGNET TECHNOLOGY CO., LTD.
Material : copper
ModelNumber : 4dff7bf328d6269f2ff70128d8faa7
NumberOfItems : 1
PartNumber : 3ddc3d98-f8ee-1b23744f9925d6
ProductDescription :
Specification:
PCB Outer Diameter Dimension: 48mm; Bore:15mm;
Thickness:1mm;
Magneticring Diameter:35mm; Bore:8mm ;
Thickness:5.6mm;
Pulse Count:100/400ppr;
OutputType:square wave double phase
Feature:
Simple structure,and easy installation;
Dual quadrature outputs;
Non-contact, no wear, longservice life;
Superior temperature stability;
High sensitivitts a wide voltagerange
Wiring Diagram:
GND - Encoder Power-;
A - Quad encoder A signal;
VDD - EncoderPower+;
B –Quad encoder B signal
Tips:
For theaccuracy specified the center line of the magnet needs to be square to the chip within 2° and aligned within the center of the board ±0.1 mm (mid point between the 2 mounting holes).
Quality Guarantee:
Allquality problems, please send us e-mail firstly, we will give you satisfactorysolution, and we're concentrating on our constant improvement of productquality and customer service
ProductSiteLaunchDate : 2020-07-31T00:34:05.133Z
Size : Small
Style : 400PPR
SupplierDeclaredDgHzRegulation : unknown
UnspscCode : 39120000
WarrantyDescription : 2 year manufacturer