Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Gearwell
BulletPoint :

Autonics E40HB8-1024-3-T-24 Rotary Encoders Incremental Type New 1PCS

Shaft inner diameter : Ø8mm

Max. response frequency : 300kHz

Max. allowable revolution : 5000rpm

Starting torque : Max. 50gf.cm(max. 0.0049N.m)

Resolution : 1024P/R

Control output : Totem pole

Power supply : 12-24VDC ±5%(ripple P-P: max. 5%)

Connection type : Radial cable type

Protection structure : IP50

BulletPoint1 : TECHNICAL PARAMETERS: Encoder has 0.25%FS linearity, range 10‑1200mm, voltage DC8‑24V
BulletPoint2 : OPERATION MODE: Encoder adopts efficient linear displacement measuring device, push pull output, side out line
BulletPoint3 : APPLICABLE SCENARIO: Applicable to cylinder, testing machine and other industries, air pipe production equipment, printing equipment, automatic welding machine, automatic encoder, ink jet machine, robot and so on
BulletPoint4 : STABLE PERFORMANCE: Encoders are suitable for all kinds of environments. They are widely concerned for their small size, excellent performance under bad conditions, accurate, flexible and simple installation
BulletPoint5 : WIDE APPLICATION: Encoder is widely used in water conservancy, steel industry, has a large choice space
Color : One Color
ExternallyAssignedProductIdentifier : 7686866737521
ExternallyAssignedProductIdentifier1 : 0734150685489
ExternallyAssignedProductIdentifier2 : 734150685489
ItemName : Draw Wire Encoder, Rotary Encoder, Pulse Stroke Optional Incremental Cable Switch Dia 38mm 10 to 1200mm Range
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : switch-encoders
Manufacturer : Gearwell
ModelName : BIRAN
ModelNumber : Gearwellbhxwu8tp5m
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Gearwellbhxwu8tp5m
ProductDescription :

Item Type: Draw Wire Encoder
Range: Approx. 10 ~ 1200mm / 0.39 ~ 47.24in
Voltage: DC8-24V
Output: Push pull output
Cable Length: Approx. 1.5meter / 4.9ft
Main Body Outer Diameter: Approx. 38mm / 1.5in
Outgoing Mode: Side outgoing mode
Central Shaft Diameter: Approx. 6mm / 0.24in
Operating Temperature: -25℃~+85℃
Voltage: DC5-24V

Package List：
1 x Draw Wire Encoder
Note:
1. During installation, the cable should be vertical to the encoder, and the cable should not rub against the outlet.
2. Do not loosen the cable connector after it is pulled out; otherwise, the sensor may be damaged. Do not exceed the total length of the wire when pulling.

ProductSiteLaunchDate : 2024-11-13T05:49:01.014Z
Size : E6B2-CWZ6C 360PR
UnitCount : 1