Cart 2 india

Specification
Brand : HFCCYBGS
BulletPoint1 : ★ Self-diagnosis from the school, intelligent design, attached software is very intimate;Massive data storage, viewing, uploading and exporting are flexible and convenient;
BulletPoint2 : ★The menu of this machine is perfect, easy to operate and realize the function customization;
BulletPoint3 : ★ Streamlined design, multi-measurement angle, including haze and reflectivity for one-button measurement;The surface of the metal base is hardened and not deformed;
BulletPoint4 : ★ Use a 5# alkaline battery to complete 10,000 measurements in a row;
BulletPoint5 : ★Adhering to the traditional advantages of accurate measurement, stable measurement, small difference between desks and good mutual compatibility;
ExternallyAssignedProductIdentifier1 : 0717023668055
ExternallyAssignedProductIdentifier2 : 717023668055
IncludedComponents : HOST AND SENSOR
ItemName : MG68-F2 Intelligent 60 85 Degree Gloss Meter Gauge for General and Low Gloss Surface
ItemTypeKeyword : surface-roughness-gauges
Manufacturer : HFCC-ksj
MeasurementAccuracy : ±1.5
ModelNumber : MG68-F2
NumberOfItems : 30
PartNumber : 23101802
ProductDescription : Application range:
★paints, printing inks, decorating materials , building materials, plastic materials;
★Bamboo, ceramics, leather, film, car care;
★ Molding mold and many other areas of material and product surface gloss measurement.
★Measuring range:Gs(60°): 0 to 1000 GU / Gs (85 & deg;): 0 to 160 GU
★Indication error:± 1.5 (0 to 119.9 GU), ± 1.5% (>120GU)
★Measuring light spot Mm2:Gs(60°): 9×16 / Gs(85°): 5×39
★Projection angle:60°,85°
★Host volume (long & times; width & times; high) mm3:155×48×75 (without base)
Host power:One AA (or LR6) alkaline dry battery or rechargeable battery
Action Considerations:
★ The entire set of instruments should be kept clean during operation. Failure to do so may result in measurement errors and inaccurate verification.
★ If there is fog, dust or smudge on the surface of the work board, please wipe it off with lens paper or soft cloth and anhydrous ethanol.
★The instrument measuring port should be attached to the measured surface to avoid external light leakage. If necessary, black light cloth and other objects can be used to block the light around the measuring mouth. It is recommended to avoid glare environmental measurements.
★ Calibration and measurement or calibration operations should be performed at the same ambient temperature, otherwise too large ambient temperature differences will result in digital offsets.
★ If the MG6 series gloss meter is not used for a long time, it should be withdrawn from the battery to avoid corrosion and damage to the instrument.
★When the MG series gloss meter is not used for a long time, it should replenish the battery pack in the machine every month.

ProductSiteLaunchDate : 2023-10-17T07:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable