Cart 2 india

Specification
Brand : Avongard
BulletPoint : The Tell-Tale is fixed across the crack using screws and plugs and/or adhesive Fix the Tell-Tale over the crack with the vertical 0 line on the calibration scale parallel with the crack to be monitored. Ensure the plate with the engraved AVONGARD name is on the right hand side of the crack. Remove the two pre-set pegs. If the crack opens or closes the cursor moves relative to the calibration scale. The opening or closing of the crack can then be recorded on the record sheet.
BulletPoint1 : Center Distance of Rolls 4", within 0.0002"; Angle: 0-60 degree; Size (LxB): 6" x 6"
BulletPoint2 : Processed through a special procedure, enabling higher precision-adjustment. Flat type for a wide range of uses. Ideal for high-accuracy grinding operations.
BulletPoint3 : Sealed against dirt and liquids. A removable handle and two precision ground rails are included for the magnetic chuck.
BulletPoint4 : Steel pole spacing: 1/16", brass pole spacing: 1/32". Center distance of rolls 4", within 0.0002".
BulletPoint5 : The ON/OFF switch magnetic surface accuracy
Color : Black
ExternallyAssignedProductIdentifier1 : 663566012810
ExternallyAssignedProductIdentifier2 : 0663566012810
IncludedComponents1 : bolts
IncludedComponents2 : wrench
ItemDisplayDimensions_Length : 3.54 centimeters
ItemDisplayWeight : 0.86 pounds
ItemName : Avongard Standard Tell-Tale Crack Monitor
ItemPackageDimensions_Height : 0.75 inches
ItemPackageDimensions_Length : 7 inches
ItemPackageDimensions_Width : 7.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : calibration-surface-plates
ItemVolume : 1 cubic_centimeters
Manufacturer : Avongard
Material : hardened steel
Material1 : Stone
Material2 : granite
ModelNumber : 2520-1000
NumberOfItems : 10
NumberOfLithiumMetalCells : 1
PartNumber : CRACK MONITOR ST-10
PowerSourceType : electric
ProductDescription : Tell-Tales are precision gauges uses to monitor movement of a crack, horizontal or vertically on a flat surface. The monitor that consist of two plates which overlap for a part of their length. The bottom plate is calibrated in millimeters and the top plate is transparent and marked with a hairline cursor in the form of a cross. The two pegs are removed. As the crack opens, or closes, the cursor moves relative to the calibration scale. The opening or closing of the crack is then recorded on the crack record sheet supplied.
ProductSiteLaunchDate : 2017-04-19T16:24:59.928Z
Size : 9.00X6.00X1.50CM
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 52150000