SpecificationAutoPartPosition : top
Brand : Lighthouse LEDs
BulletPoint1 : 10mm 12v Pre-Wired Yellow / Gold LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Ships from US)
BulletPoint2 : Size: 10mm Round Top, Color: Yellow/Gold, Luminosity: 9,000-11,000 mcd
BulletPoint3 : Forward Voltage: 6-15v (15v not recommended continuous), Current: 20mA, Wavelength: 590-595nm, Operating Voltage 6-15v (15v not recommended continuous), Wire Length: Approximately 15cm (6 inches)
BulletPoint4 : Viewing Angle: 20-30 Degrees, MountStyle: Custom, Lens Color: Clear, Resistor Built In: Yes, Additional Resistor Required: No, Shrink Wrap: Yes, Mount Style: Custom
BulletPoint5 : Super bright LEDs, used for mods, RC, adruino, cars, HO Scale models, planes, trucks, adafruit projects, halloween, christmas, PC, Ultra Light, etc...
CompatibleWithVehicleType : Truck
ConnectivityTechnology : RF
FitType : Universal Fit
FormFactor : Strip
ItemName : 10mm 12v Pre-Wired Yellow/Gold LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Pack of 50)
ItemShape : Round
ItemTypeKeyword : super-luminescent-leds
LightColor : Blue
Manufacturer : Lighthouse LEDs
Material : gold
ModelNumber : 50X12V10MMPREWIREDYELLOW
NumberOfPieces : 5
PartNumber : 50X12V10MMPREWIREDYELLOW
PowerSourceType : Corded Electric
ProductDescription :
Our pre-wired LEDs are nothing but quality. The 12v 10mm yellow / gold led puts out a nice color that is sure the illuminate your product or project. Our 10mm pre-wired leds have built in resistors so that they will work with the voltage that they are rated for. There is no need for you to add any additional resistors. The only thing you need to do is add power / ground and they will illuminate. It doesn't get much easier than that.
The 10mm pre-wired leds come with a built in resistor, all connections are heat shrinked in order to protect them and there is sufficient wire lead on all of them.
This single setup works well with the following voltages (you don't have to select a voltage when ordering): 10v, 11v, 12v, 13v, 14v and 15v. We recommend that you don't continuously run them at 15 volts, but they will take spikes as high as that without any issues at all. If you are looking for a lower voltage setup then take a look at our 9v or 6v setups that will cover the remainder of voltage ranges below 10v.
ProductSiteLaunchDate : 2017-02-10T06:19:48.130Z
Size : 50 Piece
Style : Modern
UnitCount : 5
UnspscCode : 25170000
WaterResistanceLevel : not_water_resistant