Cart 2 india

Specification
Brand : Lighthouse LEDs
BulletPoint1 : 5mm 12v Pre-wired Flashing Cool / Clear White LED - Ultra Bright (Ships from US)
BulletPoint2 : Size: 5mm Pre-Wired Round Top 12v Flashing, Color: Cool / Clear White, Luminosity: 15,000-18,000 mcd, Animation: Flashing On/Off / 1-2Hz
BulletPoint3 : Forward Voltage: 12v (volts), Current: 20mA, Wavelength: N/A Cool / Clear White, Operating Voltage 12v (volts), Wire Length: Approximately 15cm (6 inches)
BulletPoint4 : Viewing Angle: 20-30 Degrees, MountStyle: Custom, Lens Color: Clear, Resistor Built In: Yes, Additional Resistor Required: No, Shrink Wrap: Yes, Mount Style: Custom
BulletPoint5 : Super bright LEDs, used for mods, RC, adruino, cars, HO Scale models, planes, trucks, adafruit projects, halloween, christmas, PC, Ultra Light, etc...
ItemName : 10mm 12v Pre-Wired Yellow/Gold LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Pack of 5)
ItemShape : Round
ItemTypeKeyword : super-luminescent-leds
LightColor : Yellow
LightColor1 : Cool
LightColor2 : Clear White
Manufacturer : Lighthouse LEDs
Material : Copper
MaximumVoltage : 12 volts
MinimumVoltage : 10 volts
ModelNumber : 5X12V10MMPREWIREDYELLOW
NumberOfPins : 2
PartNumber : 5X12V10MMPREWIREDYELLOW
ProductDescription :

Our pre-wired LEDs are nothing but quality. The 12v 10mm yellow / gold led puts out a nice color that is sure the illuminate your product or project. Our 10mm pre-wired leds have built in resistors so that they will work with the voltage that they are rated for. There is no need for you to add any additional resistors. The only thing you need to do is add power / ground and they will illuminate. It doesn't get much easier than that.

The 10mm pre-wired leds come with a built in resistor, all connections are heat shrinked in order to protect them and there is sufficient wire lead on all of them.

This single setup works well with the following voltages (you don't have to select a voltage when ordering): 10v, 11v, 12v, 13v, 14v and 15v. We recommend that you don't continuously run them at 15 volts, but they will take spikes as high as that without any issues at all. If you are looking for a lower voltage setup then take a look at our 9v or 6v setups that will cover the remainder of voltage ranges below 10v.

ProductSiteLaunchDate : 2017-02-10T06:20:05.627Z
Size : 5 Piece
UnspscCode : 32111500
WavelengthRange : 515-525nm