Cart 2 india

Specification
AutoPartPosition : front
Brand : Lighthouse LEDs
BulletPoint1 : 3mm 12v Pre-Wired Ultra Bright LED - RGB Fast Auto Change 6v 7v 8v 9v 10v 11v (Ships from US)
BulletPoint2 : Size: 3mm Pre-Wired 12v Round Top Flashing, Color: Red/Green/Blue (RGB), Luminosity: 5,000-8,000 mcd, Animation: RGB Fast Gradual Change
BulletPoint3 : Forward Voltage: 6v-12v, Current: 20mA, Wavelength: N/A RGB, Operating Voltage 6v-12v, Wire Length: Approximately 15cm (6 inches)
BulletPoint4 : Viewing Angle: 20-30 Degrees, MountStyle: Custom, Lens Color: Clear, Resistor Built In: Yes, Additional Resistor Required: No, Shrink Wrap: Yes, Mount Style: Custom
BulletPoint5 : Super bright LEDs, used for mods, RC, adruino, cars, HO Scale models, planes, trucks, adafruit projects, halloween, christmas, PC, Ultra Light, etc...
CompatibleWithVehicleType1 : Truck
CompatibleWithVehicleType2 : Car
FitType : Universal Fit
FormFactor : Strip
ItemName : 10mm 12v Pre-Wired Pure Green LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Pack of 100)
ItemShape : Round
ItemTypeKeyword : super-luminescent-leds
LightColor : White
LightColor1 : Amber
LightColor2 : Orange
Manufacturer : Lighthouse LEDs
Material : lead
MaximumVoltage : 12 volts
MinimumVoltage : 6 volts
ModelNumber : 100X12V10MMPREWIREDPUREGREEN
NumberOfPins : 2
PartNumber : 100X12V10MMPREWIREDPUREGREEN
ProductDescription :

Our pre-wired LEDs are nothing but quality. The 12v 10mm pure green led puts out a nice color that is sure the illuminate your product or project. Our 10mm pre-wired leds have built in resistors so that they will work with the voltage that they are rated for. There is no need for you to add any additional resistors. The only thing you need to do is add power / ground and they will illuminate. It doesn't get much easier than that.

The 10mm pre-wired leds come with a built in resistor, all connections are heat shrinked in order to protect them and there is sufficient wire lead on all of them.

This single setup works well with the following voltages (you don't have to select a voltage when ordering): 10v, 11v, 12v, 13v, 14v and 15v. We recommend that you don't continuously run them at 15 volts, but they will take spikes as high as that without any issues at all. If you are looking for a lower voltage setup then take a look at our 9v or 6v setups that will cover the remainder of voltage ranges below 10v.

ProductSiteLaunchDate : 2017-02-11T07:13:57.956Z
Size : 100 Piece
Style : Modern
UnitCount : 100
UnspscCode : 25170000
WavelengthRange : 600-610nm