Cart 2 india

Specification
Brand : Everbilt
BulletPoint1 : SMTE12-8
BulletPoint2 : Tubing OD1 Left: 12 mm OD
BulletPoint3 : Tubing OD2 Right: 12 mm OD
BulletPoint4 : Tubing OD3 Center: 8 mm OD
BulletPoint5 : Body Material: 316L Stainless Steel
Color : Blue
ConnectorType : Tee
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 858001008712
ExternallyAssignedProductIdentifier2 : 0858001008712
IncludedComponents : Product Only
IncludedComponents1 : Pump (no switch) with 20-ft. cord and 115 Volt plug
IncludedComponents2 : Installation manual
ItemDisplayWeight : 42 pounds
ItemName : Everbilt 1/4 HP Aluminum Sump Pump with Tethered Switch
ItemPackageDimensions_Height : 30.7 centimeters
ItemPackageDimensions_Length : 19.9 centimeters
ItemPackageDimensions_Width : 24.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sump-pumps
Manufacturer : Everbilt
Material : Plastic
Material1 : Stainless Steel
Material2 : Cast Iron
MaximumFlowRate : 70 gallons_per_minute
ModelName : 9EC-CIM (20')
ModelNumber : HDPS25W
NumberOfItems : 1
PackageLevel : unit
PartNumber : HDPS25W
PowerSourceType : Corded Electric
ProductDescription : The Everbilt 1/4 HP submersible sump pump is built with an aluminum motor housing for efficient motor cooling. The pump is available with a tethered float switch requiring an 18 in. minimum diameter wide sump basin. The motor is built with thermal overload protection.

1-1/2 in. FNPT discharge
Semi-open thermoplastic impeller passes 3/8 in. solids
Submersible for quiet operation
Pumps up to 2000 GPH at 10 ft., outperforms the competition
Continuous duty, efficient 115-Volt PSC motor for lower carbon footprint, higher efficiency using less energy to operate
Aluminum motor housing for efficient motor cooling
8.25 ft. cord length

Product Weight (lb.): 8.49 lb
Maximum Working Temperature (F): 100
Discharge Flow @ 15 ft. (gallons/hour): 1700
Features: Bottom/End Suction,Non-Clogging,Self-Priming,Submersible,Thermal Overload Protection
Cord Length (ft.): 8.25
Impeller Material: Plastic
Pump Switch Type: Tethered
Discharge Flow @ 0 ft. (gallons/hour): 2400
Maximum Horsepower (hp): .25
Minimum working temperature (F): 35
Power Type Required: AC
Amperage (amps): 6 A
Housing Material: Aluminum
Voltage: 115v
Sump Pump Outlet Diameter Type: 1-1/2 FPT
Discharge Flow @ 10 ft. (gallons/hour): 2000
Certifications and Listings: CSA Certified


Product Depth (in.): 6.3 in
Maximum Pumping Height (ft.): 17
Switch-On Height (in.): 11.81
Product Height (in.): 10.63 in
Switch-Off Height (in.): 3.94
Product Width (in.): 8.27 in

ProductSiteLaunchDate : 2020-02-14T17:31:53.842Z
Style : Submersible,Sump Pump
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : unknown
SupplierDeclaredDgHzRegulation2 : unknown
SupplierDeclaredDgHzRegulation3 : unknown
SupplierDeclaredDgHzRegulation4 : unknown
SupplierDeclaredDgHzRegulation5 : unknown
UnitCount : 1
UnspscCode : 40151500
Voltage : 115 volts
Wattage : 800 watts