Cart 2 india

Specification
Brand : NXUTKBNK
BulletPoint1 : Industrial Power Supply
BulletPoint2 : HLG-150H-30 150W waterproof LED power supply for PFC street lights
Color : One Color
ExternallyAssignedProductIdentifier : 6411587160423
ItemName : NXUTKBNK HLG-150H-30 150W Waterproof LED Power Supply for PFC Street Lights
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : commercial-street-and-area-lighting
Manufacturer : NXUTKBNK
ModelNumber : NXUTKBNK
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : NXUTKBNK
ProductDescription : Industrial Power Supply
HLG-150H-30 150W waterproof LED power supply for PFC street lights
Model: HLG-150H-30
Work efficiency: 93.5
Output voltage accuracy: ±1
Power supply type: switching power supply
Full range AC input voltage (up to 305VAC)
Built-in active PFC (power factor correction) function, when the load is greater than or equal to 60%, the power factor is >0.9
Efficiency up to 94%
Fully enclosed aluminum alloy shell with glue potting
With short circuit protection/overcurrent protection/overvoltage protection/overheating protection
Constant voltage + constant current working mode
DC output range 30V, 0～5.0A
Constant current voltage range 60% ~ 100% set voltage
Output voltage accuracy ±1%
Ripple and noise 200mVp-p
Efficiency 93.5%
Input voltage range 90～305VAC/127～431VDC
Input surge current cold start, 65A/230V
Voltage setting range 38~46V (Type A only, adjusted through VoADJ)
Current setting range 2.16~3.6A (Type A only, adjusted through IoADJ)
<;0.75mA/240VAC
When the over-current protection output current reaches 95% ~ 108% of the set current, the constant current limit will resume.
When the over-voltage protection output is 47~53V, the output voltage is shut down and restored or restarted.
Overheating protection: shuts off the output voltage at 100℃±10℃ (RTH2) and recovers after cooling down
Start rise holding time 2500mA, 50mA, 12mA/230VAC/115VAC at full load; Type B: 2500mA, 200mA, 12mA
Insulation characteristics: between input terminal and output terminal: 3.75KVAC, between input terminal and shell: 2KVAC, between output terminal and shell: 0.5KVAC,
Operating temperature -40～+70℃ (see output load derating curve)
Vibration resistance 10～500Hz, 5G12 minutes/cycle, XYZ each axis 72 minutes each
Mean time between failures ≥ 192,200 hours, MIL-HDBK-217F (25℃)
Input wiring UL certified, SJTW 18AWG×3C (30cm)
Output wiring type A a
ProductSiteLaunchDate : 2025-05-17T10:40:57.973Z
Size : HLG-150H-30
UnitCount : 1