Specification Brand : RFS BulletPoint : Our Male Compression Tube Stub Hosing is made of high-quality materials that are built to last BulletPoint1 : Made of brass material and conform to DIN 2353, ISO 8434-1, and DIN EN 3851 standards. Extensively used in high working pressure and temperature applications. BulletPoint2 : Consists of a fitting body, nut and sleeve. The sleeve provides extra sealing capability. BulletPoint3 : Ensure an excellent and reliable sealing in high-pressure applications with strong mechanical grip design. Easy to use, fewer leak paths, dampen vibrations, ease of use and installation, and high durability. BulletPoint4 : S series single ferrule with working pressure up to 800 bars (11000 PSI). BulletPoint5 : Tee fitting with 3 compression ends to connect tubes and pipes at a 90-degree angle. Color : Stainless Steel ConnectorType : Union ExteriorFinish : Brass ExternallyAssignedProductIdentifier : 8886481749094 ExternallyAssignedProductIdentifier1 : 0840215205179 ExternallyAssignedProductIdentifier2 : 840215205179 ItemName : RFS Brass 20mm OD x 20mm OD x 20mm OD Union Tee Compression Fittings, Heavy Series ItemPackageQuantity : 1 ItemTypeKeyword : compression-union-straights Manufacturer : RFS Material : Brass MaximumPressure : 1000 pounds_per_square_inch NominalWallThickness : 0.25 inch NumberOfItems : 1 NumberOfPieces : 1 PartNumber : F-D-B-T-20S N ProductDescription : Compression fittings are commonly used in applications that requires excellent sealing in high temperature and pressure setting. These fittings are also known as single ferrule. They have a simpler design than double ferrules. Compression fittings are made to DIN 2353, ISO 8434-1, and DIN EN 3851 standards. These fittings are available in 3 series; S, L, and LL. Each series is made to suit different pressure needs. S series (high pressure) fitting has a working pressure of 315 to 630 bars, while L series (light pressure) fitting has a working pressure between 160 to 315 bars. The lowest pressure (LL) series is 100 bars. Compression fittings can be assembled and reassembled many times. Fittings vary in design but they are all made up of three parts; Body, nut, and sleeve. The benefits offered by compression fitting are fewer leak paths, dampens vibration, flexibility, and ease of installation. To install a compression fitting, place the ring and nut over the tube. Then, use a pre-assembly tool and insert the tube up to tube abutment and tighten it with 1 1/4 turns. Remove the pre-assembly tool and untighten it. Remove the nut to see if there is any visible ring formed over the tube. Use a wrench to tighten the nut with the fitting body in an upward position until there is a noticeable feeling in increase of torque and further tighten the nut ¼ turn. Single ferrule union tee is a T-shaped fitting with three ports. It connects tubes and pipes to the main line at a 90 degree angle with three compression ends. ProductSiteLaunchDate : 2022-07-22T12:24:56.344Z Size : 20 MM X 20 MM X 20 MM UnitCount : 1 UnspscCode : 40141700