Cart 2 india

Specification
Brand : MAGNATE
BulletPoint : 43326PC
BulletPoint1 : 2 Flute Carbide Tipped; 3/32" Radius; 11/16" Cutting Length; 1/2" Shank Diameter
BulletPoint2 : 13/16" Overall Diameter; 2" Shank Length
BulletPoint3 : U.S.A. Corporate headquarters and warehouse, located in new York
BulletPoint4 : Commitment to offer the highest consistent quality and innovative products
BulletPoint5 : Industrial grade
CutType : Carbide-Tipped Cut
ExternallyAssignedProductIdentifier1 : 0637881860456
ExternallyAssignedProductIdentifier2 : 637881860456
ExternallyAssignedProductIdentifier3 : 00039404132024
IncludedComponents : 1 Timberline Branded Product
ItemDisplayWeight : 0.15 pounds
ItemName : Magnate 6045 Multi-Fluting Router Bits - 3/32" Radius; 11/16" Cutting Length; 1/2" Shank Diameter
ItemPackageDimensions_Height : 0.762 centimeters
ItemPackageDimensions_Length : 12.446 centimeters
ItemPackageDimensions_Width : 7.62 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : straight-router-bits
ItemTypeName : Tool
Manufacturer : Magnate
Material : Carbide
MeasurementSystem : Inch
ModelName : 100-01
ModelNumber : 43326PC
NumberOfBoxes : 1
NumberOfFlutes : 2
NumberOfItems : 1
PackageLevel : unit
PartNumber : 6045
ProductDescription : This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. In case a bit doesn't come with a speed chart. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness: Run 24,000 rpm maximum for 1" overall diameter router bits; Run 18,000 rpm maximum for 1-1/4" overall diameter router bits; Run 16,000 rpm maximum for 2-1/4" to 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" to 3-1/2" overall diameter router bits;
ProductSiteLaunchDate : 2007-08-13T07:29:27.000-00:00
Size : 3/4 Dia x 30mm x 1/2" Shank
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Plywood,Wood
UnitCount : 1