Cart 2 india

Specification
Brand : MAGNATE
BulletPoint : 1/4"-28 Thread; 1/4" Shank Diameter; 1-3/4" Overall Length
BulletPoint1 : 2-Flute Carbide Tipped; 1/2" Rabbet Depth; 1/2" Cutting Height; 1/2" Shank Diameter
BulletPoint2 : 1-1/2" Overall Diameter; BR-03 Bearing
BulletPoint3 : 1/2" Cutter
BulletPoint4 : Thread Size, 1/4-28
BulletPoint5 : Ball bearing guides on selected edging and trimming bits prevent burning and marring
CutType : Carbide-Tipped Cut
ExternallyAssignedProductIdentifier1 : 637881835041
ExternallyAssignedProductIdentifier2 : 0637881835041
FinishType : Titanium
ItemDisplayDimensions_Height : 4.69 inches
ItemDisplayDimensions_Length : 0.25 inches
ItemDisplayDimensions_Width : 1.75 inches
ItemName : Magnate 3504 Rabbeting Router Bit - 1/2" Rabbet Depth, 1/2" Cutting Height, 1/2" Shank Diameter
ItemPackageDimensions_Height : 2.03 centimeters
ItemPackageDimensions_Length : 11.94 centimeters
ItemPackageDimensions_Width : 3.56 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : straight-router-bits
Manufacturer : Magnate
Material : Carbide
Material1 : Diamond
Material2 : High Speed Steel
ModelNumber : 22305
NumberOfFlutes : 2
PartNumber : 3504
ProductDescription : It is designed for easy wood joining. Shearing cut brazed at an angle assures smooth, clean cutting results. It can also be used for lap joints and biscuit joining. This carbide tipped bit is specifically designed and manufactured for the high quality precision required by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Always refer to the operation manual of your router first, in the event that a router bit doesn't come with a speed chart, you may start at about 2,000 rpm slower than the maximum speed described in the chart below. Maximum speed below is for reference only, actual best performance speed varies depending on a number of factors i.e. size of the router bit, the material to be cut, etc. Run 24,000 rpm maximum for 1" overall diameter router bits; Run 20,000 rpm maximum for 1-1/2" overall diameter router bits; Run 18,000 rpm maximum for 2" overall diameter; Run 16,000 rpm maximum for 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" overall diameter router bits; Run 10,000 rpm maximum for 3-1/2" overall diameter router bits;
ProductSiteLaunchDate : 2006-01-06T07:15:03.000-00:00
Size : Small
UnitCount : 1
UnspscCode : 27111701