Cart 2 india

Specification
Brand : John Guest
BulletPoint1 : Straight adapter connects pipes or fittings of different types in a straight line
BulletPoint2 : Push-to-connect fitting connects to pipes or tubing on one end and has an NPTF male connector on the other
BulletPoint3 : Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength
BulletPoint4 : Working pressure of up to 150 psi
BulletPoint5 : Meets NSF/ANSI standards 14, 51, and 61 for quality assurance
Color : Gray
ConnectorType : Adapter
Department : unisex-adult
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier : 7622635163542
ExternallyAssignedProductIdentifier1 : 665626046261
ExternallyAssignedProductIdentifier2 : 0665626046261
ExternallyAssignedProductIdentifier3 : 711426423549
ExternallyAssignedProductIdentifier4 : 696335153858
IncludedComponents : Male Straight
ItemName : John Guest Acetal Copolymer Tube Fitting, Straight Adaptor, 3/8" Tube OD x 1/8" NPTF Male (Pack of 10)
ItemPackageDimensions_Height : 2.54 centimeters
ItemPackageDimensions_Length : 11.938 centimeters
ItemPackageDimensions_Width : 8.128 centimeters
ItemPackageQuantity : 1
ItemShape : Adapter
ItemTypeKeyword : straight-tube-fittings
Manufacturer : John Guest
Material : Acetal
ModelName : PC8-N2-10
ModelNumber : PI011221S
NumberOfItems : 10
NumberOfPieces : 10
NumberOfPorts : 2
PartNumber : PI011221S
ProductDescription : Directions for use! Do Not Exceed 145Psi Pressure. Working Temperature: 32～143°F, do Not Use Outside the Service Temperature Range to Prevent Deformation of the Sealing Material and Easy Leakage. Do Not Use in Places with Too Much Dust or Particles. Do Not Use Any Medium Other Than Air. the Product is Limited to Air or Vacuum Environment. After Completing the Connection, Please Gently Pull the Tube with Your Hand to Make Sure That It is Completely Connected Without Falling Off. Make Sure That the Cutting Surface of the Pipe is Vertical, There is No Scar on the Outer Circumference of the Pipe and the Pipe is Not Oval.
Never Apply Tube Joint with Additional External Load(bending, twist, or Pulling), otherwise, Damage or Leakage Will occur.
When Inserting the Pipe, It Must Be Inserted into the Bottom of the Joint. Failure to Insert the Pipe into the Bottom May Lead to Air Leakage.

ProductSiteLaunchDate : 2012-02-07T08:00:01.000Z
Size : 3/8" Tube OD x 1/8" NPTF Male
Style : Push-to-Connect
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 10
UnspscCode : 40183100