Cart 2 india

Specification
AgeRangeDescription : adult
Brand : easytooly
BulletPoint1 : SS316 Male to Female Run Pipe Thread - NPT 1/8" 1/4" 3/8" 1/2" 3 Way Connector 3000psig 20MPa Stainless Steel Pipe Fitting.
BulletPoint2 : Excellent finish level to allow smooth flow transition.
BulletPoint3 : Every pieces of elbows have radius junction to eliminate entrapment areas and to allow smooth flow transition.
BulletPoint4 : Fine threads meets the requirement of ASME/ANSI B1.20.1 to ensure maximum thread engagement.
BulletPoint5 : The hardened threads with smooth outside finishing avoid galling and help to extend the fitting service life.
Color : One Color
ExternallyAssignedProductIdentifier : 8493788717277
ItemName : easytooly SS316 Male to Female Run Pipe Thread - NPT 1/8"" 1/4"" 3/8"" 1/2"" 3 Way Connector 3000psig 20MPa Pipe Fitting 1PC(Size:1/2""), 0.5 Inch
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : straight-tube-fittings
Manufacturer : easytooly
ModelName : CAARLA
ModelNumber : easytooly
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : easytooly
ProductDescription : SS316 Male to Female Run Pipe Thread - NPT 1/8" 1/4" 3/8" 1/2" 3 Way Connector 3000psig 20MPa Stainless Steel Pipe Fitting 1PC0.125 in -- 1/8"0.25 in -- 1/4"0.375 in -- 3/8"0.5 in -- 1/2"M means Male threadF means Female threadApplication1. For inert gas.2. For reactive, flammable, oxidizing and corrosive gases and gas mixtures, purity max. 6.0.3. Pipe fittings also can be used for oils, water, liquids and steam.Features:1. Excellent finish level to allow smooth flow transition.2. Every pieces of elbows have radius junction to eliminate entrapment areas and to allow smooth flow transition.3. Fine threads meets the requirement of ASME/ANSI B1.20.1 to ensure maximum thread engagement.4. The hardened threads with smooth outside finishing avoid galling and help to extend the fitting service life.5. Working pressures are higher than the traditional piping class.6. Every fitting is marked with thread type, size and material.Material316 Stainless Steel,Straight fittings are machined from bar stock and shaped fittings from forgings.Bar stock according to ASTM A276, ASME SA479, EN 1.4401Forgings according to ASTM A182, ASME SA182, EN 1.4401Thread SpecificationsPressure Rating for Pipe End ThreadAllowable pressure ratings for male and female threads are based on ASME B31.3 at ambient temperature.Installation InstructionPipe thread sealant is recommended for a leak tight seal. PTFE tape is commonly used only for installation of the pipe fittings with male thread.1. Make sure both male and female threads clean.2. Warp PTFE tape clockwise from the first thread.3. Two time of wrapping is recommended.4. Don't overhang tape on the first thread as it might be entered the system.5. Cut off excess tape.Cautions:1. Do not loosen or tighten fittings when system is p
ProductSiteLaunchDate : 2024-05-30T09:50:54.050Z
Size : 0.5 Inch
Style : Welding Machine
UnitCount : 1
UnspscCode : 31161700