Specification Brand : HJGarden BulletPoint1 : Materials for water and food use: Our valve stem three-way quick connectors are made of safe and non-toxic materials. Widely used in RODI systems, pipelines or drip irrigation systems, etc. BulletPoint2 : Easy to install: The new generation of non locking clip technology provides a simple DIY installation without the need for tools, just plug in the connection. BulletPoint3 : Size and pipeline compatibility: two 1/4'' quick connect fittings X 1/4'' valve stem plugs; Standard 1/4 inch outer diameter water pipe suitable for most water purification systems (carefully check your pipe size before ordering). BulletPoint4 : Function and quality: A quick connect joint is a coupling used to provide fast and successful connection of fluid transmission pipelines. Manual operation, quick connection of accessories to replace threaded or flange connections that require a wrench. BulletPoint5 : Note: Our quick adapters are reusable and can be installed with lockless clips. Can also be used with locking clamps. Color : Black ConnectorType : Elbow ExternallyAssignedProductIdentifier : 7707655580064 ItemName : HJGarden 5PCS 1/4 inch Black Quick Connect Push in to Connect for Water Reverse Osmosis System Water Tube Fitting ItemPackageDimensions_Height : 20.9 centimeters ItemPackageDimensions_Length : 1.2 centimeters ItemPackageDimensions_Width : 13.7 centimeters ItemPackageQuantity : 5 ItemTypeKeyword : push-to-connect-tube-fittings Manufacturer : HJGarden Material : Glass ModelNumber : 48240-LSEWP-14-B5 NumberOfItems : 5 NumberOfPieces : 5 PartNumber : 48240-LSEWP-14-B5 ProductDescription : Specification Name: Water pipe plug glass partition clamp tee joint Color: Black Material: pp Dimensions: 1/4 inch (6.5mm)
How to use it: Just pop your 1/4" tube into each end and push until it won't go in. To remove, just push the outer ring of each end in and pull it out. You need to make sure the tube is cut square, To make sure there are no leaks. Make sure you cut the tubing evenly and straight, without crimping it. Then insert it straight in, and all the way into the connector. If it is bent, or not inserted all the way, or crimped, it may leak.