Cart 2 india

Specification
Brand : MMLFX
BulletPoint : Tap Hole: M6, Depth 0.3 inch (8 mm) (both ends) / Maximum Usage Temperature: 176°F (80°C), Lower Limit: -4°F (-20°C)
BulletPoint1 : Material: 304 stainless steel
BulletPoint2 : Thickness of 4cm-8cm blade is 1.5mm, thickness of 10cm-12cm is 2mm
BulletPoint3 : Package include : 1set=1piece blade+1piece rod+a pair of screw
BulletPoint4 : Angle degree of stirring blade is 45°. 45°stirring blade: Push up the material, The blade pushes the material upwards while stirring.
Color : Onecolor
ExternallyAssignedProductIdentifier : 7548479719182
ItemName : MMLFX 1set Lab Stainless Steel Three-leaf Paddle 45° Stirrer Three Blade With Agitating Stirring Rod (Size : 5cm blade with rod)
ItemPackageDimensions_Height : 40 millimeters
ItemPackageDimensions_Length : 310 millimeters
ItemPackageDimensions_Width : 40 millimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : science-lab-stirring-rods
Manufacturer : MMLFX
Material : Stainless Steel
NumberOfItems : 1
PartNumber : MMLFX
ProductDescription : 1set lab stainless steel three-leaf paddle stirrer three blade with agitating stirring rod

Specification:
Item: stirring blade with rod
Material: 304 stainless steel
Thickness of 4cm-8cm blade is 1.5mm, thickness of 10cm-12cm is 2mm
Qty: 1set=1piece blade+1piece rod+a pair of screw
Specific instructions:
4/5cm three-leaf blade: with the size of the stirring rod is 8X250mm.
6/7/8cm three-leaf blade: with the size of the stirring rod is 8X300mm.
10cm three-laef blade: with the size of the stirring rod is 8X400mm.
12cm three-leaf blade: with the size of the stirring rod is 8X450mm.
Stirring direction:
45°stirring blade: Push up the material, The blade pushes the material upwards while stirring.
Tips: If the material is thin, it is recommended to use" 30°stirring blade" to prevent the material from splashing out.
Note: Angle degree of stirring blade is 45°.
ProductSiteLaunchDate : 2022-06-14T15:17:55.587Z
Size : 5cm blade with rod
Style : Stirrer
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1