Cart 2 india

Specification
Brand : Weldcote Metals
BulletPoint : Sales Unit of Measure: Case
BulletPoint1 : 1.5% Lanthanated (Gold) EWLa-1.5/WL15
BulletPoint2 : Principal Oxide: 1.3 –1.7% Lanthanum Oxide
BulletPoint3 : Non-Radioactive. Best for use in Direct Current (D/C) as an alternative to 2% Thoriated using inverter or transformer based constant current power sources.
BulletPoint4 : Best for non corroding steels, titanium alloys, nickel alloys, copper alloys. Best D/C arc starts and stability, low erosion rate, wide amperage range, no spitting.
BulletPoint5 : Package:10/EA
Color : Purple
ExternallyAssignedProductIdentifier1 : 0877511004649
ExternallyAssignedProductIdentifier2 : 877511004649
ExternallyAssignedProductIdentifier3 : 00639890010563
IncludedComponents : Unit^Instruction Guide
ItemDisplayDimensions_Length : 12 inches
ItemDisplayDimensions_Width : 0.63 inches
ItemDisplayWeight : 4.55 pounds
ItemForm : Ground
ItemName : Weldcote TUNG332X7LAN 1.5% Lanthanated Tungsten Electrode 3/32 X 7", 10 pack
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 10
ItemShape : Long
ItemTypeKeyword : arc-welding-stick-electrodes
Manufacturer : Weldcote Metals
Material : Iron Powder Low Hydrogen Electrode
ModelNumber : 187GE3
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : TUNG332X7LAN
ProductDescription : 1.5% lanthanated tungsten electrodes (AWS classification EWLa-1.5) contain a minimum of 97.80% tungsten and 1.30 to 1.70% lanthanum, or lanthana. These electrodes have excellent arc starting, low-burn-off rate, good arc stability and excellent re-ignition characteristics, many of the same advantages as ceriated electrodes. 1.5% lanthanated electrodes also closely resemble the conductivity characteristics of 2% thoriated tungsten, meaning, in some cases, it can replace 2% thoriated without having to make significant welding program changes.1.5% lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. Lanthanated electrodes work well on AC or DC electrode negative with a pointed end or they can be balled for use with AC sine wave power sources. The lanthana is dispersed evenly throughout the entire length of the electrode during manufacturing. It also maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or the AC from squarewave power sources. Unlike thoriated tungsten, these electrodes are suitable for AC welding and, like ceriated electrodes, allow for the arc to be started and maintained at lower voltages. AC Compared to pure tungsten, the addition of 1.5% lanthana increases the maximum carrying capacity by approximately 50% for a given size electrode. Package of 10
ProductExpirationType : Expiration On Package
ProductSiteLaunchDate : 2018-10-04T12:00:00.000-08:00
Size : 1/8 in Dia, 7 in Long
SkipOffer : 1
Style : Pack
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10