Cart 2 india

Specification
Brand : Radnor
BulletPoint : E27 electrode rod is applicable to the E27 electrode rod of INNO IFS-10 V3/V5/V7/55/15 optical fiber splicer electrode rod (1 pair)
BulletPoint1 : Many types of welding rods require use of an oven to follow quality laws and regulations. Check chart below to verify if you need an oven for the electrode type you use
BulletPoint2 : Not using an oven on rods which require one can lead to slag inclusion, porosity, and undercut, but most notably this can cause cracking which leads to structural failures and lack of air tightness
BulletPoint3 : Max Temperature 300°F | This oven has a max temperature of 300°F, which is the perfect temperature for rods such as 7018, 316L, and 6018.
BulletPoint4 : Lid Locks Shut | The lid has a latch mechanism which protects you from accidentally exposing your electrodes to the elements
BulletPoint5 : Plugs Into Most Outlets | Standard wall plug will plug into almost any outlet with no issue
Color : Yellow
Department : Tools
ExternallyAssignedProductIdentifier : 00840338563385
ExternallyAssignedProductIdentifier1 : 639890019559
ExternallyAssignedProductIdentifier2 : 0639890019559
IncludedComponents : E27 electrode rod
IncludedComponents1 : Welding Rod Oven
IncludedComponents2 : Power Cord
ItemDisplayWeight : 4.55 pounds
ItemName : Radnor RAD64001955 0.040" x 7" Ground Finish 2% Thoriated Tungsten Electrode (10 Per Package)
ItemPackageDimensions_Height : 3 inches
ItemPackageDimensions_Length : 3 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemTypeKeyword : arc-welding-stick-electrodes
Manufacturer : Radnor
Material : Tungsten
ModelName : Yellow Welding Rod Oven 22 Lb
ModelNumber : ARAS-RAD64001955
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : RAD64001955
PowerSourceType : ac_dc
ProductDescription : RAD64001955 Features: -Price Is For One Package -Minimum Order Of 1. -Thorium-Dioxide-Doped Tungsten Electrodes Containing 1.8% - 2.2% THO2. The most common type of electrode used on carbon and stainless steel.The higher thoria content in the EWTh-2 electrode causes the operating characteristic improvements to be more pronounced than in the lower thoria content EWTh-1. To use Thoriated electrodes for alternating current welding, balling of the end can be accomplished by briefly, and carefully, welding with direct current electrode positive prior to welding with alternating current. During alternating current welding, the balled end does not melt and so emission is not as good as from a liquid ball on an EWP electrode.. -RADNOR (PACKED 10 PER PACK). -Longer life than 1% Thoria while providing easy arc starting, stable arc, higher current capacity and increased resistance to weld pool contamination. Electrodes are 100% Eddy Current tested Annealed brittled for ease of sizing Finest available tungsten powder (APT) Manufactured under a quality system certified to ISO 9001 requirements Meets AWS/ANSI specifications Ground for maximum smoothness. Material: -Tungsten. Generic Dimensions: -7'' H x 0.04'' W x 0.04'' D. Dimensions: Overall Length - Top to Bottom: -7 Inches. Overall Width - Side to Side: -0.04 Inches. Overall Depth - Front to Back: -0.04 Inches.
ProductSiteLaunchDate : 2010-08-03T10:27:39.410Z
Size : 22 Pound Capacity
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 110 volts
Wattage : 360 watts