Cart 2 india

Specification
Brand : PATIKIL
BulletPoint : 87S 88S 88R Electrodes Rod For Fujikura SM-41S FSM-38S FSM-27S FSM-28S FSM-87S Fiber Fusion Splicer ELCT2-16B Electrode Rod
BulletPoint1 : Carbon rods are non-metallic products. As a necessary pre-welding cutting consumable in the carbon arc gouging cutting process, they are made of carbon, graphite and appropriate binders, and are formed by extrusion. It is mainly used to remove the residual temporary weld bead. Widely used in foundry, boiler, shipbuilding, chemical industry, etc.
BulletPoint2 : Package Content: 50 x Carbon Gouging Rod; Total Size(LxWxH): 355x12x5mm/14x0.47x0.2 inch; Material: Copper, Graphite
BulletPoint3 : After baking at 2200℃, it is made by plating a layer of copper. It has high-temperature resistance, good electrical conductivity is not easy to break, and has low noise. It is suitable for cutting metals into shapes that meet the requirements.
BulletPoint4 : When cutting, it can be processed by arc cutting. The carbon rod and the workpiece are at an angle of 45°. The carbon rod must be kept dry, and it must be dried before use when wet.
BulletPoint5 : Tips: When used in the DC power supply, the carbon rod is connected to the positive pole of the power supply, and the workpiece is connected to the negative pole, which needs to be operated according to the working current.
Color : Blue
ExternallyAssignedProductIdentifier1 : 085267344166
ExternallyAssignedProductIdentifier2 : 0085267344166
ExternallyAssignedProductIdentifier3 : 0441034844107
ExternallyAssignedProductIdentifier4 : 0046843760442
IncludedComponents : Product & Instructions Guide
ItemDisplayWeight : 6 pounds
ItemForm : Rod
ItemName : PATIKIL Flat Gouging Carbon Electrode Rod, Copper Coated Gouging Electrode Rod 355x12x5mm for Welding, Pack of 50
ItemPackageDimensions_Height : 2.52 inches
ItemPackageDimensions_Length : 15.35 inches
ItemPackageDimensions_Width : 4.33 inches
ItemPackageQuantity : 50
ItemShape : Rectangular
ItemTypeKeyword : arc-welding-stick-electrodes
Manufacturer : PATIKIL
Material : Copper, Graphite
ModelName : For Fujikura SM-41S FSM-38S FSM-27S FSM-28S FSM-87S 88S Fiber Fusion Splicer ELCT2-16B Electrode Rod
ModelNumber : pta220820tt1244
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : pta220820tt1244
PowerSourceType : AC
ProductDescription : What is this?
Carbon rods are non-metallic products. As a necessary pre-welding cutting consumable in the carbon arc gouging cutting process, they are made of carbon, graphite and appropriate binders, and are formed by extrusion. It is mainly used to remove the residual temporary weld bead. Widely used in foundry, boiler, shipbuilding, chemical industry, etc.

What will I get?
Package Content: 50 x Carbon Gouging Rod; Total Size(LxWxH): 355x12x5mm/14x0.47x0.2 inch; Material: Copper, Graphite

Are there any advantages of the product?
After baking at 2200℃, it is made by plating a layer of copper. It has high-temperature resistance, good electrical conductivity is not easy to break, and has low noise. It is suitable for cutting metals into shapes that meet the requirements.

How to use it?
When cutting, it can be processed by arc cutting. The carbon rod and the workpiece are at an angle of 45°. The carbon rod must be kept dry, and it must be dried before use when wet.

What should I notice?
Tips: When used in the DC power supply, the carbon rod is connected to the positive pole of the power supply, and the workpiece is connected to the negative pole, which needs to be operated according to the working current.
ProductSiteLaunchDate : 2022-12-31T11:35:41.652Z
Size : 355x12x5mm
StreetDate : 2021-10-23T00:00:01Z
Style : 1 Pair
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1